NJ 2WD NV4500 + AA Bellhousing

[MidLifer]

I have this posted in the 88-98 parts forum since it came from a 93 but maybe someone here is interested. Was planning to use this for my C10 but am going 6.0/4L80e instead:

http://67-72chevytrucks.com/vboard/s...d.php?t=676587

Trans SOLD
AA Bell $300 + ride

[bigrigpardo]

interested. were are you located? do you know the history of the trans? did it have the right fluid I know these transmissions have a lot of synchro issues

[MidLifer]

Bigrig I am located 5 minutes from Exit 4 of NJTP and 10 minutes from the Betsy Ross Bridge.

I bought the trans from a guy who is into old trucks but is not a board member. I do not know the history other than what he told me which is that it came out of a 1993 3500. The brass synchros all look in good shape as well as the gears. I have not filled the trans. It was dry when I got it. You would be welcome to look inside before buying and judge for yourself.

[bigrigpardo]

I am very interested and can pick it up.

[bigrigpardo]

cool I know there are a bunch of varieties on these but would you know if the input shaft measures the same as the sm465? I know the 3/4 ton trucks do but some 1 tons had a bigger shaft.

[MidLifer]

I will measure tonight and post.

[bigrigpardo]

cool and could you do one more thing. I see it has a electric speedo. could you pull the sensor and see if it is a driven gear or a reluctor wheel

[MidLifer]

Hopefully these pics will answer your questions.

It's a magnetic speedo pickup. You'll need an electric speedo or a converter box.

Are you interested in the bell too or just the trans?

[bigrigpardo]

I think I would need just the trans as I am putting it in a 2wd and would reuse my stock bellhousing like locdoc did.

[hillbilly_deluxe]

Do you have this on Craigslist. Think I ran across it today just never found a minute to call you
Kyle

[MidLifer]

Originally Posted by hillbilly_deluxe

Do you have this on Craigslist. Think I ran across it today just never found a minute to call you
Kyle

Yes I do but the price is higher over there to account for the craigslist factor.
Posted via Mobile Device

[bigrigpardo]

I am going to call advanced adapters to see what they say about the speedo. I am still interested.

[MidLifer]

Two potential solutions to convert to your mechanical speedo:

http://www.abbott-tach.com/cablex.htm

www.summitracing.com/parts/dak-ecd-100-2

[MidLifer]

ttt - still available. Will strap this securely to a pallet for freight shipping. Will also drop at a terminal to save a few bucks. R&L, Central, YRC and Conway all have terminals near me. Dry weight is 195 lb.

[LockDoc]

Originally Posted by MidLifer

ttt - still available. Will strap this securely to a pallet for freight shipping. Will also drop at a terminal to save a few bucks. R&L, Central, YRC and Conway all have terminals near me. Dry weight is 195 lb.

-
Another shipping possibility would be Fastenal if you and the buyer have stores near you. I shipped a long tail shaft NV4500, bell housing, and flywheel (300# total) from Maryland to central Iowa for $150. Just a thought.....

LockDoc

[MidLifer]

Thanks Leon. There is a Fastenal near me. I've never done this but I assume it's pretty straightforward.

When I bought this trans I had it shipped from upstate NY, near the Canadian border, for $110. I used uShip, it came on a Central Transport truck.

[MidLifer]

This is still very available. One more bump.

[MidLifer]

pre-Labor day bump. Great Labor Day weekend project!

[MidLifer]

trans sold but bellhousing still available