LS Cruise Wiring - Problem - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ls1nova71 · 09-29-2015, 10:03 PM

The front side markers were originally hooked to the park light wire in the front, which is the way you have yours, but instead of grounding the other wire, hook it to the power wire to the turn signal. That way they flash with the turn signals when the park lights are off, and when the park lights are on they will flash opposite the turn signals.

As for the cruise, are you sure you still have power to the cruise switch? Is it DBW or cable?

Did you change anything else?

09-29-2015, 10:03 PM	#1
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: LS Cruise Wiring - Problem The front side markers were originally hooked to the park light wire in the front, which is the way you have yours, but instead of grounding the other wire, hook it to the power wire to the turn signal. That way they flash with the turn signals when the park lights are off, and when the park lights are on they will flash opposite the turn signals. As for the cruise, are you sure you still have power to the cruise switch? Is it DBW or cable? Did you change anything else? __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.