where to get drop springs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cruzman8 · 02-19-2004, 12:58 PM

Where's the best place to get drop springs ? I'm working on a budget.Thanks

**COBALT** · 02-19-2004, 01:14 PM

That's a toughie....someone on here might be willing to part with some they've decided they don't want.

If you end up buying new try some of the kits you can get aftermarket. Ask some of the vendors through this site.

If you want to do it right I'd save your $$$ and go to Early Classic Enterprises. They'll help you out with technical problems too. Good guys, but they're a little pricey.

70c10 · 02-19-2004, 01:55 PM

Budget- try the late 70's Monte Carlo rear springs everyone here has been talking about. 4" drop with these.

PT'S 70 CST · 02-19-2004, 06:42 PM

TRY WWW.CHASSISTECH.COM I BOUGHT A SET OF THESE AND I THINK I ONLY PAID ABOUT 175.00 SHIPPED TO MY DOOR. I WILL CHECK ON THE PRICE TO MAKE SURE, BUT THAT IS CLOSE I AM ALLMOST SURE. THE CO. IS AIM INDUTRIES/ CHASSIS TECH AND THEY ARE LOCATED IN MESA, AZ.

70c10 · 02-19-2004, 06:58 PM

Most board vendors sell these for between $99 and $109 I believe.

PT'S 70 CST · 02-19-2004, 08:15 PM

I PAID $157.00 TOTAL FOR THE WHOLE SET (2 FRONT AND 2 REAR) SHIPPED TO MY HOUSE

MOTHERTRUCKERS · 02-19-2004, 09:07 PM

Everybody sells them, just make sure they are progressive rate lifetime warranty springs to avoid hassles.

Bamm · 02-19-2004, 10:29 PM

Cruzman - pm sent

02-19-2004, 12:58 PM	#1
cruzman8 Registered User Join Date: Sep 2002 Location: Morganton,North Carolina Posts: 69	where to get drop springs Where's the best place to get drop springs ? I'm working on a budget.Thanks __________________ Cruzman

02-19-2004, 01:14 PM	#2
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	That's a toughie....someone on here might be willing to part with some they've decided they don't want. If you end up buying new try some of the kits you can get aftermarket. Ask some of the vendors through this site. If you want to do it right I'd save your $$$ and go to Early Classic Enterprises. They'll help you out with technical problems too. Good guys, but they're a little pricey. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

02-19-2004, 01:55 PM	#3
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Budget- try the late 70's Monte Carlo rear springs everyone here has been talking about. 4" drop with these. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

02-19-2004, 06:42 PM	#4
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	SPRINGS TRY WWW.CHASSISTECH.COM I BOUGHT A SET OF THESE AND I THINK I ONLY PAID ABOUT 175.00 SHIPPED TO MY DOOR. I WILL CHECK ON THE PRICE TO MAKE SURE, BUT THAT IS CLOSE I AM ALLMOST SURE. THE CO. IS AIM INDUTRIES/ CHASSIS TECH AND THEY ARE LOCATED IN MESA, AZ. __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops Last edited by PT'S 70 CST; 02-19-2004 at 06:44 PM.

02-19-2004, 06:58 PM	#5
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Most board vendors sell these for between $99 and $109 I believe. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

02-19-2004, 08:15 PM	#6
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	I PAID $157.00 TOTAL FOR THE WHOLE SET (2 FRONT AND 2 REAR) SHIPPED TO MY HOUSE __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

02-19-2004, 09:07 PM	#7
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Everybody sells them, just make sure they are progressive rate lifetime warranty springs to avoid hassles. __________________ Rest in Peace Ed. Thanks for all the good times.

02-19-2004, 10:29 PM	#8
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Cruzman - pm sent __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.