New to me 87 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

calvin78612 · 10-02-2015, 08:07 PM

Flew to Little Rock this morning and got this little gem and had a nice ride back to the DFW area.

calvin78612 · 10-02-2015, 08:11 PM

Factory tbi,dual tanks,and cold a/c. Need to figure out how to adjust drivers door. It needs to close a little more.This will be a driver.Love it so far. I'm usually on the 67-72 side, but I've always loved the 3rd gen c-10s.

turbosix · 10-02-2015, 08:15 PM

Quote:

Originally Posted by calvin78612

Factory tbi,dual tanks,and cold a/c. Need to figure out how to adjust drivers door. It needs to close a little more.This will be a driver.Love it so far. I'm usually on the 67-72 side, but I've always loved the 3rd gen c-10s.

Very nice! Post some interior pics. Check the striker and see it the plastic bushing is missing. That will cause it to not close tight.

calvin78612 · 10-02-2015, 08:23 PM

Thanks. I'll post pics of the interior and front grill tomorrow. I am beat from the early flight and drive back,plus i'm getting up early and heading to goodguys.

calvin78612 · 10-02-2015, 08:25 PM

Quote:

Originally Posted by turbosix

Very nice! Post some interior pics. Check the striker and see it the plastic bushing is missing. That will cause it to not close tight.

Plastic bushing is missing.I'll try that.The hinges seem to be good.

bowtiebutler956 · 10-02-2015, 08:50 PM

The truck is absolutely gorgeous!

Right colors, right wheels, perfect stance. Love it, and congrats.

Matt

RandyS8229 · 10-02-2015, 09:39 PM

Sweet truck! Are you gonna drop it?

bbbc10 · 10-02-2015, 10:10 PM

just seen this on cl few days ago...sharp truck!

Zach079xxx · 10-02-2015, 11:45 PM

An old trick I know about is to take electric tape and spin it around the door jam until you think its enough! Homemade bushing :P

Quote:

Originally Posted by calvin78612

Plastic bushing is missing.I'll try that.The hinges seem to be good.

UKNOWME · 10-03-2015, 12:12 AM

Quote:

Originally Posted by Zach079xxx

An old trick I know about is to take electric tape and spin it around the door jam until you think its enough! Homemade bushing :P

Works great too!
Door strikers are cheap though

Zach079xxx · 10-03-2015, 01:40 AM

Yep either works great. I thought the tape trick was just cool

Quote:

Originally Posted by UKNOWME

Works great too!
Door strikers are cheap though

Kaysen · 10-03-2015, 08:15 AM

Yeah I saw it on craigslist also. I text the seller a few times, very sharp truck. Might see ya at goodguys, I'm about to head that way! Congrats

UKNOWME · 10-03-2015, 08:25 AM

Quote:

Originally Posted by Zach079xxx

Yep either works great. I thought the tape trick was just cool

No doubt that it is! I wasn't downgrading you idea at all. I did that the other day on my Tahoe tailgate because I cannot find strikers for it.

calvin78612 · 10-03-2015, 08:35 PM

Quote:

Originally Posted by bowtiebutler956

The truck is absolutely gorgeous!

Right colors, right wheels, perfect stance. Love it, and congrats.
Thanks Matt !
Matt

Quote:

Originally Posted by RandyS8229

Sweet truck! Are you gonna drop it?

Randy, It's got a 3/5 drop already.

Quote:

Originally Posted by bbbc10

just seen this on cl few days ago...sharp truck!

Thanks man.I;m stoaked !

Quote:

Originally Posted by UKNOWME

Works great too!
Door strikers are cheap though

Just picked up the strikers at O'rieleys,Dorman p/n 38421,9 bucks a piece.Also have the loose bolts in the tilt cloum so I picked up a pivot pin puller.Gonna have to research that a little more first.

Quote:

Originally Posted by Kaysen

Yeah I saw it on craigslist also. I text the seller a few times, very sharp truck. Might see ya at goodguys, I'm about to head that way! Congrats

Thanks ! Goodguys was a blast,perfect weather.Did you happen to see the cobra get into the fence ?

Kaysen · 10-04-2015, 10:06 AM

No I missed that I guess. It was a perfect day for it, I'm kicking myself for not going back for some nos center caps now though.

cases84square · 10-04-2015, 11:05 AM

Nice looking truck! Are those the mb old school wheels? 20s?

10-02-2015, 08:07 PM	#1
calvin78612 Registered User Join Date: Mar 2010 Location: Aledo, Texas Posts: 804	New to me 87 Flew to Little Rock this morning and got this little gem and had a nice ride back to the DFW area. Attached Images __________________ 84 step side 87 swb

10-02-2015, 08:11 PM	#2
calvin78612 Registered User Join Date: Mar 2010 Location: Aledo, Texas Posts: 804	Re: New to me 87 Factory tbi,dual tanks,and cold a/c. Need to figure out how to adjust drivers door. It needs to close a little more.This will be a driver.Love it so far. I'm usually on the 67-72 side, but I've always loved the 3rd gen c-10s. __________________ 84 step side 87 swb

10-02-2015, 08:23 PM	#4
calvin78612 Registered User Join Date: Mar 2010 Location: Aledo, Texas Posts: 804	Re: New to me 87 Thanks. I'll post pics of the interior and front grill tomorrow. I am beat from the early flight and drive back,plus i'm getting up early and heading to goodguys. __________________ 84 step side 87 swb

10-02-2015, 08:50 PM	#6
bowtiebutler956 Registered User Join Date: Sep 2009 Location: Harlingen, Texas Posts: 24	Re: New to me 87 The truck is absolutely gorgeous! Right colors, right wheels, perfect stance. Love it, and congrats. Matt __________________ 1984 C10 long bed. Built 383, Lunati VooDoo flat tappet 233/241*(.050) 504/525 lift, Brodix IK200 heads, Edelbrock RPM air gap, Holley 750 DP. 700R4 Trans, with shift kit, and 3000 stall. 3.42 gears. 1993 K2500 ext/LB, 4x4. 3.42's, 4L80E, 6.5 TD, Holset Turbo, Intercooled, modified IP, 4" exhaust

10-02-2015, 09:39 PM	#7
RandyS8229 Registered User Join Date: Oct 2015 Location: Melbourne FL Posts: 27	Re: New to me 87 Sweet truck! Are you gonna drop it?

10-02-2015, 10:10 PM	#8
bbbc10 Diggin The SquareLife Join Date: Dec 2010 Location: garland,tx Posts: 1,933	Re: New to me 87 just seen this on cl few days ago...sharp truck!

10-03-2015, 08:15 AM	#12
Kaysen Registered User Join Date: Dec 2013 Location: Marietta, OK Posts: 277	Re: New to me 87 Yeah I saw it on craigslist also. I text the seller a few times, very sharp truck. Might see ya at goodguys, I'm about to head that way! Congrats

10-04-2015, 10:06 AM	#15
Kaysen Registered User Join Date: Dec 2013 Location: Marietta, OK Posts: 277	Re: New to me 87 No I missed that I guess. It was a perfect day for it, I'm kicking myself for not going back for some nos center caps now though.

10-04-2015, 11:05 AM	#16
cases84square Registered User Join Date: Dec 2014 Location: Lucedale, Ms Posts: 30	Re: New to me 87 Nice looking truck! Are those the mb old school wheels? 20s?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.