Brakes on 62 c10 has anyone.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigwin59 · 10-06-2015, 02:00 PM

Has anyone installed the spindle conversions from brothers, lmc or else where? We have already decided to use a power booster for my sons 62 c10. Was at Brothers yesterday and saw their spindle conversion kit I am seriously thinking about it. Wondering how hard the install would be and if any other mods would have to be done to the front end and if the brake lines need to be passed through the frame or mounted to the frame.
He has been working his tail off with his job to purchase his needed parts so I figured we could buy the conversion kit for him.
Thanks in advance for advice.

His build is on instagram c10build_flatwhite

forestb · 10-06-2015, 04:36 PM

I have done it to min and it was not all that difficult just fallow the directions. Make sure you get a good bracket for installing the new brake booster. One might come with the kit. You will have to run new lines and you might be able to use the old mounting locations for this. When I first did mine I don't think they were mounted to any thing but that does not mean it is a good idea. I don't think they have to run through the frame. This would also be a good time to replace your ball joint if they need to be replaced but watch out those can be expensive for a 62. If you do a smart search you should be able to find a thread with a lot more information on the install and also the best place to purchase the kit and new ball joints.

**slepysal** · 10-06-2015, 05:10 PM

I just did mine.1960 very similar to a 1962.
Do you have a m/t or automatic? If you have a manual adding a booster can be a challenge, but use Captin Fabs adaptor.

here is a link to my swap
http://67-72chevytrucks.com/vboard/s...ight=1960+disc

bigwin59 · 10-07-2015, 01:18 PM

We put a 700r4 trans in for him. it was a manual he wanted it to be automatic.
Guess I will buy the disc brake kit for him.

We have some wiring issues to figure out still, hopefully by the end of weekend that part will be done. Then put the seats in and hope to start the minor body work to get it to paint shop. It has been 10 months since we started.

Trying to get it on the road for his birthday in December so he can drive it for the rest of his senior year in high school.

**slepysal** · 10-07-2015, 01:25 PM

Quote:

Originally Posted by bigwin59

We put a 700r4 trans in for him. it was a manual he wanted it to be automatic.
Guess I will buy the disc brake kit for him.

We have some wiring issues to figure out still, hopefully by the end of weekend that part will be done. Then put the seats in and hope to start the minor body work to get it to paint shop. It has been 10 months since we started.

Trying to get it on the road for his birthday in December so he can drive it for the rest of his senior year in high school.

Very Nice !!! Any pics?

bigwin59 · 10-07-2015, 01:32 PM

Quote:

Originally Posted by slepysal

Very Nice !!! Any pics?

He takes more than I do. I will have him send me some pics and then i can post them. He posts all of his pictures on instagram. His profile is c10build_flatwhite

10-06-2015, 02:00 PM	#1
bigwin59 Registered User Join Date: Nov 2014 Location: SoCal Posts: 36	Brakes on 62 c10 has anyone.... Has anyone installed the spindle conversions from brothers, lmc or else where? We have already decided to use a power booster for my sons 62 c10. Was at Brothers yesterday and saw their spindle conversion kit I am seriously thinking about it. Wondering how hard the install would be and if any other mods would have to be done to the front end and if the brake lines need to be passed through the frame or mounted to the frame. He has been working his tail off with his job to purchase his needed parts so I figured we could buy the conversion kit for him. Thanks in advance for advice. His build is on instagram c10build_flatwhite

10-06-2015, 04:36 PM	#2
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: Brakes on 62 c10 has anyone.... I have done it to min and it was not all that difficult just fallow the directions. Make sure you get a good bracket for installing the new brake booster. One might come with the kit. You will have to run new lines and you might be able to use the old mounting locations for this. When I first did mine I don't think they were mounted to any thing but that does not mean it is a good idea. I don't think they have to run through the frame. This would also be a good time to replace your ball joint if they need to be replaced but watch out those can be expensive for a 62. If you do a smart search you should be able to find a thread with a lot more information on the install and also the best place to purchase the kit and new ball joints.

10-06-2015, 05:10 PM	#3
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Brakes on 62 c10 has anyone.... I just did mine.1960 very similar to a 1962. Do you have a m/t or automatic? If you have a manual adding a booster can be a challenge, but use Captin Fabs adaptor. here is a link to my swap http://67-72chevytrucks.com/vboard/s...ight=1960+disc __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

10-07-2015, 01:18 PM	#4
bigwin59 Registered User Join Date: Nov 2014 Location: SoCal Posts: 36	Re: Brakes on 62 c10 has anyone.... We put a 700r4 trans in for him. it was a manual he wanted it to be automatic. Guess I will buy the disc brake kit for him. We have some wiring issues to figure out still, hopefully by the end of weekend that part will be done. Then put the seats in and hope to start the minor body work to get it to paint shop. It has been 10 months since we started. Trying to get it on the road for his birthday in December so he can drive it for the rest of his senior year in high school.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.