What needed to swap to 292 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

62stepside longbox · 10-12-2015, 09:24 PM

I currently have a 261 (same as 235) in my truck with 4spd. But I have been offered a 292 with power steering, intake and headers from a friend for $400. What will need to be changed to go to a 292? Bell housing? Motor mounts? Anything else? Thanks.
Nik

**TJ's Chevy** · 10-12-2015, 10:25 PM

Bell housing....clutch and pressure plate....You'll need mounts and perches for a 292....That has a manual clutch right?

padresag · 10-12-2015, 11:08 PM

there are several ways to do it. if you can find a 60-62 283 bellhousing will simplify your clutch problems as it has the passenger side access for the hydr. clutch the 60-62 housing will fit a chev engs 63 and up for many years.
ron

scuderia · 10-12-2015, 11:22 PM

Quote:

Originally Posted by 62stepside longbox

I currently have a 261 (same as 235) in my truck with 4spd. But I have been offered a 292 with power steering, intake and headers from a friend for $400. What will need to be changed to go to a 292? Bell housing? Motor mounts? Anything else? Thanks.
Nik

I need friends like that : )

62stepside longbox · 10-13-2015, 01:01 AM

Quote:

Originally Posted by TJ's Chevy

Bell housing....clutch and pressure plate....You'll need mounts and perches for a 292....That has a manual clutch right?

It's a hydraulic clutch

62stepside longbox · 10-13-2015, 01:33 AM

Quote:

Originally Posted by padresag

there are several ways to do it. if you can find a 60-62 283 bellhousing will simplify your clutch problems as it has the passenger side access for the hydr. clutch the 60-62 housing will fit a chev engs 63 and up for many years.
ron

So will only the 60-62 283 bell housing work? Or will any small block bell housing work? And will any small block motor mounts bolt right in or will they need modification? Any help is appreciated as I am very lost right now.
Nik

padresag · 10-13-2015, 01:56 AM

Quote:

Originally Posted by 62stepside longbox

So will only the 60-62 283 bell housing work? Or will any small block bell housing work? And will any small block motor mounts bolt right in or will they need modification? Any help is appreciated as I am very lost right now.
Nik

if you can find a 60-62 283 bellhousing will simplify your clutch problems as it has the passenger side access for the hydr. clutch. if you do not understand your truck should have a passenger side mounted clutch now. these are the only years that was installed. it saves you from fab a drivers side clutch setup.

ron

padresag · 10-14-2015, 12:21 AM

this is basically the same except that the passenger side perch is set forward for the 292 eng
http://67-72chevytrucks.com/vboard/s...d.php?t=369663
forgot the link
ron

10-12-2015, 09:24 PM	#1
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	What needed to swap to 292 I currently have a 261 (same as 235) in my truck with 4spd. But I have been offered a 292 with power steering, intake and headers from a friend for $400. What will need to be changed to go to a 292? Bell housing? Motor mounts? Anything else? Thanks. Nik __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

10-12-2015, 10:25 PM	#2
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: What needed to swap to 292 Bell housing....clutch and pressure plate....You'll need mounts and perches for a 292....That has a manual clutch right? __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

10-12-2015, 11:08 PM	#3
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: What needed to swap to 292 there are several ways to do it. if you can find a 60-62 283 bellhousing will simplify your clutch problems as it has the passenger side access for the hydr. clutch the 60-62 housing will fit a chev engs 63 and up for many years. ron

10-14-2015, 12:21 AM	#8
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: What needed to swap to 292 this is basically the same except that the passenger side perch is set forward for the 292 eng http://67-72chevytrucks.com/vboard/s...d.php?t=369663 forgot the link ron Last edited by padresag; 10-14-2015 at 02:02 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.