4L80E behind a 5.3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ls1nova71 · 10-17-2015, 12:06 PM

It may depend on where the engine is mounted, but my blue 72 had a 6.0/4l80e and had the low hump and it fit fine. There are pics in the build thread in my sig if you want to see where the engine was, but it was close enough to stock that the fan fit the fan shroud.

boostedc10 · 10-17-2015, 09:26 PM

Quote:

Originally Posted by ls1nova71

It may depend on where the engine is mounted, but my blue 72 had a 6.0/4l80e and had the low hump and it fit fine. There are pics in the build thread in my sig if you want to see where the engine was, but it was close enough to stock that the fan fit the fan shroud.

Must be. I know on mine with Nates crossmember there is no way its fitting under the low hump.

On a side note yours and acks trucks were the ones that pushed me to an LS in mine. Loved how clean it was! Have you seen it since it sold at auction?

10-17-2015, 12:06 PM	#1
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: 4L80E behind a 5.3 It may depend on where the engine is mounted, but my blue 72 had a 6.0/4l80e and had the low hump and it fit fine. There are pics in the build thread in my sig if you want to see where the engine was, but it was close enough to stock that the fan fit the fan shroud. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.