Canada Need tilt column parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**chewychevy67** · 10-16-2015, 01:34 PM

I need the top lever cover and the bearing retainer housing underneath it. Mine were damaged by my painter. Both are pictured here. I don't need a full column just these pieces. Shipping to S0K2T0 in Canada through USPS please. Rod. ALSO I could use a NEW lower bearing if anyone out there has one. Please no damaged, dented pieces and the lip on the top cover must have no damage from removal.

**Classic Bowties** · 10-16-2015, 02:03 PM

Do you have a lower 48 shipping address that the three needed parts could sent to? Mel

**chewychevy67** · 10-16-2015, 02:14 PM

I have a buddy who has one . I'll see if I can use it. I'll get back to you .

**chewychevy67** · 10-16-2015, 05:47 PM

Not going to bother greg so it will have to be shipped to Mt Canadian a dress so if to can't send it directly to me that's fine. Ttt

MadnessBigBlock · 10-16-2015, 07:11 PM

I have an American address if you want to ship it there, I'm down there once a month and I could bring it back to winnipeg and ship it to you from here if you wanted.

**chewychevy67** · 10-16-2015, 07:52 PM

No but thanks for the offer. Im not in a huge hurry for these. I would like to have the parts shipped to myself.

DD1 · 10-16-2015, 10:43 PM

Quote:

Originally Posted by chewychevy67

No but thanks for the offer. Im not in a huge hurry for these. I would like to have the parts shipped to myself.

Why don't you just order the parts from LMC then? They sell steering column parts.

**chewychevy67** · 10-17-2015, 12:37 AM

I justlooked on their website and they have some parts but they don't have the parts I'm looking for.

**chewychevy67** · 10-17-2015, 12:37 AM

Quote:

Originally Posted by Classic Bowties

Do you have a lower 48 shipping address that the three needed parts could sent to? Mel

Sending pm

DD1 · 10-17-2015, 12:57 AM

Quote:

Originally Posted by chewychevy67

I justlooked on their website and they have some parts but they don't have the parts I'm looking for.

They have the bearing housing support and the lower bearing.

http://www.lmctruck.com/icatalog/cb/full.aspx?Page=134

**chewychevy67** · 10-17-2015, 01:22 AM

They do you are right. I should have read a bit further. I will try to get OEM stuff here first but if I can't find it I will look into lmc. Thank you for searching it. Rod

DD1 · 10-17-2015, 01:26 AM

Quote:

Originally Posted by chewychevy67

They do you are right. I should have read a bit further. I will try to get OEM stuff here first but if I can't find it I will look into lmc. Thank you for searching it. Rod

You are welcome. I can appreciate wanting OEM, but sometimes brand new is better; especially with bearings. You might have a hard time finding new OEM.

**Classic Bowties** · 10-17-2015, 09:34 PM

Quote:

Originally Posted by chewychevy67

Sending pm

Here are the requested tilt column parts that I have on hand. The upper bearing housing comes complete with both bearings and locking shoes $75., the outer metal t/s switch cover is in nice undamaged condition $50., and one new in the bag GM lower shaft bearing $40. Let me know if you can figure the lwr 48 shipping out, Mel.

**Classic Bowties** · 10-17-2015, 09:36 PM

more pics...

**chewychevy67** · 10-20-2015, 01:37 PM

Found what I needed a little closer to home. Thanks anyway. Rod.

10-16-2015, 01:34 PM	#1
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,557	Need tilt column parts I need the top lever cover and the bearing retainer housing underneath it. Mine were damaged by my painter. Both are pictured here. I don't need a full column just these pieces. Shipping to S0K2T0 in Canada through USPS please. Rod. ALSO I could use a NEW lower bearing if anyone out there has one. Please no damaged, dented pieces and the lip on the top cover must have no damage from removal. Attached Images Last edited by chewychevy67; 10-16-2015 at 01:54 PM.

10-16-2015, 02:03 PM	#2
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,764	Re: Need tilt column parts Do you have a lower 48 shipping address that the three needed parts could sent to? Mel

10-16-2015, 02:14 PM	#3
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,557	Re: Need tilt column parts I have a buddy who has one . I'll see if I can use it. I'll get back to you .

10-16-2015, 05:47 PM	#4
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,557	Re: Need tilt column parts Not going to bother greg so it will have to be shipped to Mt Canadian a dress so if to can't send it directly to me that's fine. Ttt

10-16-2015, 07:11 PM	#5
MadnessBigBlock Registered User Join Date: May 2008 Location: Neche, North Dakota/Winnipeg, Manitoba Posts: 605	Re: Need tilt column parts I have an American address if you want to ship it there, I'm down there once a month and I could bring it back to winnipeg and ship it to you from here if you wanted.

10-16-2015, 07:52 PM	#6
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,557	Re: Need tilt column parts No but thanks for the offer. Im not in a huge hurry for these. I would like to have the parts shipped to myself.

10-17-2015, 12:37 AM	#8
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,557	Re: Need tilt column parts I justlooked on their website and they have some parts but they don't have the parts I'm looking for.

10-17-2015, 01:22 AM	#11
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,557	Re: Need tilt column parts They do you are right. I should have read a bit further. I will try to get OEM stuff here first but if I can't find it I will look into lmc. Thank you for searching it. Rod

10-17-2015, 09:36 PM	#14
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,764	Re: Need tilt column parts more pics... Attached Images

10-20-2015, 01:37 PM	#15
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,557	Re: Need tilt column parts Found what I needed a little closer to home. Thanks anyway. Rod.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.