Project: "Might-as-well" - 70 C-10 LWB - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70LonghornCST · 12-31-2011, 03:58 AM

Very nice truck!

Steve Hafner · 08-13-2012, 08:12 PM

. . . .

We're finally getting to do some "little things" on the truck.

Joe touched up all of the missing black on the front end, wheel weights and side marker lights on Saturday. We got it all ready for a local cruise at the VFW 15 miles away . . . drove over and found out it was F R I D A Y night !!!

( I hope this isn't the start of a new chapter . . . "Project: C.R.S." !!! )

We're planning on going back THIS Friday night, so we'll have some pictures with the "new" wheel covers soon.

. . . .

stfinney · 08-13-2012, 08:51 PM

Looks great! I wish mine was in that condition so maybe the wife wouldn't try and have me get rid of it (not going to happen). Can't wait to see more pics.

Steve Hafner · 09-15-2012, 05:03 PM

. . . .

The boys and I FINALLY got the truck out to a local show today.

Below, are a few pictures ( the first I've taken with the Highlander wheel covers )

. . . .

FRENCHBLUE72 · 09-16-2012, 02:33 PM

Good looking truck..

Steve Hafner · 08-24-2013, 10:18 PM

. . . .

Joe put another coat of the "wood boat" wax on the bed today.

The wax must be doing what it's supposed to . . . the wood still looks about the same as it did two years ago when I finished it.

( of course, it's never been wet and hardly sees the sun !!! )

. . . .

Steve Hafner · 09-07-2013, 04:42 PM

. . . .

The wood bed saw a little sunlight today.

Joe and I went to a "judged" show at the local high school.

There were 144 cars and trucks there . . . and beautiful weather.

We didn't come home with a trophy, but are bellies are full.

We parked along the curb, which made the $500 toolbox really stand out !!!

. . . .

gs-xnr · 12-21-2013, 02:24 PM

I love the box/floor finishing.

I have a couple of questions, if you don't mind. When you put your box and bed back together, does the front bed panel sit on top or under the wood floor? And do the side panels bolt to the cross braces directly or through the wood floor?

May sound like dumb questions, but I purchased an unfinished project and am just about to do a trial fit of the pieces.

Thanks very much.
Harvey

Mr Chevorlet · 12-21-2013, 03:30 PM

Nice truck you have, love the tool box also.

Steve Hafner · 12-21-2013, 09:53 PM

Quote:

Originally Posted by gs-xnr

I love the box/floor finishing.

I have a couple of questions, if you don't mind. When you put your box and bed back together, does the front bed panel sit on top or under the wood floor? And do the side panels bolt to the cross braces directly or through the wood floor?

May sound like dumb questions, but I purchased an unfinished project and am just about to do a trial fit of the pieces.

Thanks very much.
Harvey

I wish I could answer your question, but I didn't do any of that work myself and the guy who did it is unavailable now - Thanks for the compliments anyway !!! I'm also not near the truck at the moment to go check it out.

Mr Chevorlet · 12-21-2013, 11:39 PM

Quote:

Originally Posted by gs-xnr

I love the box/floor finishing.

I have a couple of questions, if you don't mind. When you put your box and bed back together, does the front bed panel sit on top or under the wood floor? And do the side panels bolt to the cross braces directly or through the wood floor?

May sound like dumb questions, but I purchased an unfinished project and am just about to do a trial fit of the pieces.

Thanks very much.
Harvey

Harvey, the wood sets on top of the front panel and the bolts go through the wood and panel to keep it from flexing. And then the bed sides bolt through the wood and through the rails. I just did mine a couple of months ago. Hope this helps.

Steve Hafner · 01-05-2014, 11:08 AM

Quote:

Originally Posted by Mr Chevorlet

Harvey, the wood sets on top of the front panel and the bolts go through the wood and panel to keep it from flexing. And then the bed sides bolt through the wood and through the rails. I just did mine a couple of months ago. Hope this helps.

. . . .

My bed is held down from the bottom, instead of having those big bolt heads sticking out of that EXPENSIVE wood.

gs-xnr · 01-06-2014, 11:42 AM

Quote:

Originally Posted by Mr Chevorlet

Harvey, the wood sets on top of the front panel and the bolts go through the wood and panel to keep it from flexing. And then the bed sides bolt through the wood and through the rails. I just did mine a couple of months ago. Hope this helps.

Thank you Larry. The jigsaw puzzle is starting come together. Harvey

Steve Hafner · 09-22-2015, 07:02 AM

. . . .

I guess I should end my build thread with the pictures I took for the ads on Craigslist, Hemmings, AutoTrader Classics
and in the for sale area of this website . . .
. . . health issues are forcing me to sell it and move out of state.
We've enjoyed it for 19 years, I just wish it was worth more then HALF of what I have in it !!!

. . . .

Steve Hafner · 10-21-2015, 04:41 PM

. . . .

The truck was SOLD today . . . it went to a "good home".

We had nineteen years of enjoyment out of it . . .

. . . and as I told the new owner: " I couldn't have done it without all of the great people on this website " - THANKS for all your help.

. . . .

69Tom · 10-21-2015, 07:29 PM

Sorry you had to sell it, Steve. Hopefully you're moving to a warm state and maybe one day you can get another one. It was a nice truck, that's for sure....

Steve Hafner · 10-25-2015, 08:50 PM

Quote:

Originally Posted by 69Tom

Sorry you had to sell it, Steve. Hopefully you're moving to a warm state and maybe one day you can get another one. It was a nice truck, that's for sure....

. . . .

" NOBODY retires and moves NORTH " !!!

I'm moving to Alabama, where all of my family lives.

12-31-2011, 03:58 AM	#51
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Project: "Might-as-well" - 70 C-10 LWB Very nice truck! __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

08-13-2012, 08:12 PM	#52
Steve Hafner Registered User Join Date: Sep 2010 Location: Northport, Alabama Posts: 1,353	Re: Project: "Might-as-well" - 70 C-10 LWB . . . . We're finally getting to do some "little things" on the truck. Joe touched up all of the missing black on the front end, wheel weights and side marker lights on Saturday. We got it all ready for a local cruise at the VFW 15 miles away . . . drove over and found out it was F R I D A Y night !!! ( I hope this isn't the start of a new chapter . . . "Project: C.R.S." !!! ) We're planning on going back THIS Friday night, so we'll have some pictures with the "new" wheel covers soon. . . . . Attached Images

08-13-2012, 08:51 PM	#53
stfinney Registered User Join Date: Apr 2011 Location: Vero Beach, FL Posts: 173	Re: Project: "Might-as-well" - 70 C-10 LWB Looks great! I wish mine was in that condition so maybe the wife wouldn't try and have me get rid of it (not going to happen). Can't wait to see more pics. __________________ Shawn 1972 C10 Custom LWB, 3-speed automatic, 350 bored .060 over, Vortec heads, Crane Energizer 260 H10 Cam My Beater/Work in Progress http://67-72chevytrucks.com/vboard/s...d.php?t=502044

09-15-2012, 05:03 PM	#54
Steve Hafner Registered User Join Date: Sep 2010 Location: Northport, Alabama Posts: 1,353	Re: Project: "Might-as-well" - 70 C-10 LWB . . . . The boys and I FINALLY got the truck out to a local show today. Below, are a few pictures ( the first I've taken with the Highlander wheel covers ) . . . . Attached Images Last edited by Steve Hafner; 09-16-2012 at 10:55 AM.

09-16-2012, 02:33 PM	#55
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project: "Might-as-well" - 70 C-10 LWB Good looking truck.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-24-2013, 10:18 PM	#56
Steve Hafner Registered User Join Date: Sep 2010 Location: Northport, Alabama Posts: 1,353	Re: Project: "Might-as-well" - 70 C-10 LWB . . . . Joe put another coat of the "wood boat" wax on the bed today. The wax must be doing what it's supposed to . . . the wood still looks about the same as it did two years ago when I finished it. ( of course, it's never been wet and hardly sees the sun !!! ) . . . . Attached Images Last edited by Steve Hafner; 11-29-2013 at 10:34 AM.

09-07-2013, 04:42 PM	#57
Steve Hafner Registered User Join Date: Sep 2010 Location: Northport, Alabama Posts: 1,353	Re: Project: "Might-as-well" - 70 C-10 LWB . . . . The wood bed saw a little sunlight today. Joe and I went to a "judged" show at the local high school. There were 144 cars and trucks there . . . and beautiful weather. We didn't come home with a trophy, but are bellies are full. We parked along the curb, which made the $500 toolbox really stand out !!! . . . . Attached Images

12-21-2013, 02:24 PM	#58
gs-xnr Registered User Join Date: Oct 2013 Location: Vancouver, BC Posts: 12	Re: Project: "Might-as-well" - 70 C-10 LWB I love the box/floor finishing. I have a couple of questions, if you don't mind. When you put your box and bed back together, does the front bed panel sit on top or under the wood floor? And do the side panels bolt to the cross braces directly or through the wood floor? May sound like dumb questions, but I purchased an unfinished project and am just about to do a trial fit of the pieces. Thanks very much. Harvey

12-21-2013, 03:30 PM	#59
Mr Chevorlet Rusty Nuts Join Date: Sep 2008 Location: Clever Missouri Posts: 1,338	Re: Project: "Might-as-well" - 70 C-10 LWB Nice truck you have, love the tool box also. __________________ (Clever Missouri) Southwest Larry Mr Chevrolet My Build, The Marathon Truck http://67-72chevytrucks.com/vboard/s...d.php?t=604414

09-22-2015, 07:02 AM	#64
Steve Hafner Registered User Join Date: Sep 2010 Location: Northport, Alabama Posts: 1,353	Re: Project: "Might-as-well" - 70 C-10 LWB . . . . I guess I should end my build thread with the pictures I took for the ads on Craigslist, Hemmings, AutoTrader Classics and in the for sale area of this website . . . . . . health issues are forcing me to sell it and move out of state. We've enjoyed it for 19 years, I just wish it was worth more then HALF of what I have in it !!! . . . . Attached Images __________________ . . . . Life is short . . . we only have, right now. . . . . My 70 C-10's BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=475526 Last edited by Steve Hafner; 10-25-2015 at 08:51 PM.

10-21-2015, 04:41 PM	#65
Steve Hafner Registered User Join Date: Sep 2010 Location: Northport, Alabama Posts: 1,353	Re: Project: "Might-as-well" - 70 C-10 LWB . . . . The truck was SOLD today . . . it went to a "good home". We had nineteen years of enjoyment out of it . . . . . . and as I told the new owner: " I couldn't have done it without all of the great people on this website " - THANKS for all your help. . . . . __________________ . . . . Life is short . . . we only have, right now. . . . . My 70 C-10's BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=475526 Last edited by Steve Hafner; 10-25-2015 at 08:52 PM.

10-21-2015, 07:29 PM	#66
69Tom Registered User Join Date: Jul 2015 Location: Phoenix, AZ Posts: 1,335	Re: Project: "Might-as-well" - 70 C-10 LWB Sorry you had to sell it, Steve. Hopefully you're moving to a warm state and maybe one day you can get another one. It was a nice truck, that's for sure....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.