Clutch linkage adjustments - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Myoldtruck · 10-26-2015, 10:05 AM

Hello all. Ive had my c10 for 4 weeks now and looking to see if there is any adjustments to the clutch linkage I can do to make pushing the pedal down not so much of a chore.

On the short list im going to do: Grease the Z-bar, grease linkage shafts, Install correct frame return spring.

Ive also read that there should be about 1" inch of travel in the clutch pedal before any engagement, so the pedal travels some. Any thoughts on that.

Redline novdog · 10-26-2015, 06:04 PM

Yes you lube everything,alignment could be a factor, but some depends on the pressure plate that is in the clutch asembly,

10-26-2015, 10:05 AM	#1
Myoldtruck Registered User Join Date: Sep 2015 Location: Mohnton pa. Posts: 208	Clutch linkage adjustments Hello all. Ive had my c10 for 4 weeks now and looking to see if there is any adjustments to the clutch linkage I can do to make pushing the pedal down not so much of a chore. On the short list im going to do: Grease the Z-bar, grease linkage shafts, Install correct frame return spring. Ive also read that there should be about 1" inch of travel in the clutch pedal before any engagement, so the pedal travels some. Any thoughts on that.

10-26-2015, 06:04 PM	#2
Redline novdog Registered User Join Date: Jan 2012 Location: Washington,Il Posts: 632	Re: Clutch linkage adjustments Yes you lube everything,alignment could be a factor, but some depends on the pressure plate that is in the clutch asembly, __________________ It builds on my intelligence when I make a mistake, Boy am I building on it! '67 C-10,'70 Nova SS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.