67 C30 Bucket Seats? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bluek5 · 10-17-2015, 01:14 AM

I spotted what is left of a 67 C30 motorhome that is going to be parted out. I was curious if anyone might have an idea what they would have used in a 67. I imagine that they are out of a GM car. Just wondering if they would be worth grabbing?
Paul

**special-K** · 10-17-2015, 09:26 AM

It's hard to say. In 67/68 they were buddy buckets, but back then just plain bucket seats. The RV company sourced their own parts for such changes to properly outfit these campers. Buddy buckets wouldn't have allowed for the pass-through, so they used something else. Never seen ones like those used, so it may be possible they weren't with the truck originally? Can we see the fronts?

bluek5 · 10-17-2015, 10:26 AM

I am not sure when they will put it out in the yard. I will check back on it the next couple of days. Hopefully snap some pictures.

cooperhw · 10-17-2015, 10:55 AM

the ones from my 68 looked to be just some cheap repops from JC Whitney or someone similar. The passenger front seat actually tilts forward. Gave mine away to a buddy.

**HeloCrewChief** · 10-17-2015, 11:46 AM

Almost look like 64/65 Nova or Chevelle buckets.

**too much stuff** · 10-17-2015, 12:29 PM

Quote:

Originally Posted by special-K

It's hard to say. In 67/68 they were buddy buckets, but back then just plain bucket seats. The RV company sourced their own parts for such changes to properly outfit these campers. Buddy buckets wouldn't have allowed for the pass-through, so they used something else. Never seen ones like those used, so it may be possible they weren't with the truck originally? Can we see the fronts?

I pulled a set of buddy buckets from a 67 OR 68 C30 years ago that the company hacked the inner part of the frame off and threw away the center console for the walk through. Had some crude metal work on the inside of the frame work. (to make 2 individual seats)Too bad they are buried in the garage somewhere.....

**undertaker72** · 10-18-2015, 09:00 PM

paul those look simulair to the ones in the 70 c30 motorhome I have ill have to get pics and compare , do these have a flange on the side

**special-K** · 10-19-2015, 08:36 AM

Quote:

Originally Posted by too much stuff

I pulled a set of buddy buckets from a 67 OR 68 C30 years ago that the company hacked the inner part of the frame off and threw away the center console for the walk through. Had some crude metal work on the inside of the frame work. (to make 2 individual seats)Too bad they are buried in the garage somewhere.....

Ah, the things we did to these trucks back when they were just the current model and they were everywhere

bluek5 · 10-27-2015, 05:33 PM

The truck made it out in the yard this morning. I ended up pulling a bunch of parts off of it that I was not planning on.

EARNHARDT#3 · 10-27-2015, 08:56 PM

Nab that steering wheel...you'll get at least $125 for it on the parts board.

bluek5 · 10-27-2015, 08:59 PM

Quote:

Originally Posted by EARNHARDT#3

Nab that steering wheel...you'll get at least $125 for it on the parts board.

Thanks for the heads up. I will grab it tomorrow if it is still there. It is starting to crack, and I did not have a puller with me.

10-17-2015, 01:14 AM	#1
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	67 C30 Bucket Seats? I spotted what is left of a 67 C30 motorhome that is going to be parted out. I was curious if anyone might have an idea what they would have used in a 67. I imagine that they are out of a GM car. Just wondering if they would be worth grabbing? Paul Attached Images

10-17-2015, 09:26 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 67 C30 Bucket Seats? It's hard to say. In 67/68 they were buddy buckets, but back then just plain bucket seats. The RV company sourced their own parts for such changes to properly outfit these campers. Buddy buckets wouldn't have allowed for the pass-through, so they used something else. Never seen ones like those used, so it may be possible they weren't with the truck originally? Can we see the fronts? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-17-2015, 10:55 AM	#4
cooperhw Registered User Join Date: Oct 2014 Location: Mesa AZ (Near Phoenix) Posts: 2,303	Re: 67 C30 Bucket Seats? the ones from my 68 looked to be just some cheap repops from JC Whitney or someone similar. The passenger front seat actually tilts forward. Gave mine away to a buddy. __________________ "Life is too short to drive a boring vehicle". Later, Wayne

10-17-2015, 11:46 AM	#5
HeloCrewChief Senior Member Join Date: Aug 2010 Location: North Alabama Posts: 1,057	Re: 67 C30 Bucket Seats? Almost look like 64/65 Nova or Chevelle buckets. __________________ 1970 C10 to K20 conversion 1974 GMC Jimmy 1968 50th Anniversary Short Bed 1968 Chevelle 1964 Comet Caliente 1990 W250 Cummins

10-18-2015, 09:00 PM	#7
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: 67 C30 Bucket Seats? paul those look simulair to the ones in the 70 c30 motorhome I have ill have to get pics and compare , do these have a flange on the side

10-17-2015, 10:26 AM	#3
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: 67 C30 Bucket Seats? I am not sure when they will put it out in the yard. I will check back on it the next couple of days. Hopefully snap some pictures.

10-27-2015, 05:33 PM	#9
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: 67 C30 Bucket Seats? The truck made it out in the yard this morning. I ended up pulling a bunch of parts off of it that I was not planning on. Attached Images

10-27-2015, 08:56 PM	#10
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Re: 67 C30 Bucket Seats? Nab that steering wheel...you'll get at least $125 for it on the parts board. __________________ 1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.