69 GMC c15, leaf spring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

409impala1 · 06-15-2015, 02:24 PM

I have a rear left broken leaf spring, does anyone have one or what can replace it. probably put on a set of them.

hugger6933 · 06-15-2015, 03:03 PM

Have you looked at any of the squares springs?[73-87]. I have a line on a 72 GMC short bed for salvage, It probably has the leafs as it didn't look to be hard loaded just a regular truck. The leafs were standard on the GMC and optional on the Chevrolet. It was just backwards from the Chevrolet that had standard coils with optional leafs. Jim

Matt Cramer · 06-15-2015, 03:44 PM

Might want to try contacting these guys.

http://www.springsnthings.com/index.htm

409impala1 · 11-04-2015, 11:01 PM

What rear springs will fit this? I am dire need of help. thanks

Mike C · 11-05-2015, 09:20 AM

The two wheel drive 69-72 trucks use 2 1/4" wide springs (except the Longhorn and probably the C30) while the squares use 2 1/2", so that is out.

Eaton-Detroit can build you stock replacement springs or you can get drop springs from places like Early Classic Enterprises. The other option is to find a parts truck with 2 1/4" leafs. C20 leafs will physically fit but have a higher spring rate and different ride height.

06-15-2015, 02:24 PM	#1
409impala1 Registered User Join Date: Dec 2005 Location: nebraska Posts: 136	69 GMC c15, leaf spring I have a rear left broken leaf spring, does anyone have one or what can replace it. probably put on a set of them.

06-15-2015, 03:03 PM	#2
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,280	Re: 69 GMC c15, leaf spring Have you looked at any of the squares springs?[73-87]. I have a line on a 72 GMC short bed for salvage, It probably has the leafs as it didn't look to be hard loaded just a regular truck. The leafs were standard on the GMC and optional on the Chevrolet. It was just backwards from the Chevrolet that had standard coils with optional leafs. Jim

06-15-2015, 03:44 PM	#3
Matt Cramer Registered User Join Date: Apr 2012 Location: Covington, GA Posts: 386	Re: 69 GMC c15, leaf spring Might want to try contacting these guys. http://www.springsnthings.com/index.htm __________________ Matt Cramer 1972 Chevy C10 - 4.8 swap, long bed, and maybe one dent free body panel somewhere - SOLD 4.8 LS build thread

11-04-2015, 11:01 PM	#4
409impala1 Registered User Join Date: Dec 2005 Location: nebraska Posts: 136	Re: 69 GMC c15, leaf spring What rear springs will fit this? I am dire need of help. thanks

11-05-2015, 09:20 AM	#5
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,727	Re: 69 GMC c15, leaf spring The two wheel drive 69-72 trucks use 2 1/4" wide springs (except the Longhorn and probably the C30) while the squares use 2 1/2", so that is out. Eaton-Detroit can build you stock replacement springs or you can get drop springs from places like Early Classic Enterprises. The other option is to find a parts truck with 2 1/4" leafs. C20 leafs will physically fit but have a higher spring rate and different ride height. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.