250 six cylinder oil filter

[TJ's Chevy]

I use a 1061 on my 292. Same thing basically as the 1060 from what I remember it might just be a bit longer.

[GRX]

Originally Posted by TJ's Chevy

I use a 1061 on my 292. Same thing basically as the 1060 from what I remember it might just be a bit longer.

Was curious so looked up both on the NAPA website. Seems they are exactly the same except the 1061 has a higher burst pressure and lacks an anti drain back valve.

http://www.nfhconnect.com/Home

Part Number: 1060
UPC Number: 765809135901
Style: Spin-On Lube Filter
Service: Lube
Type: Full Flow
Media: Enhanced Cellulose
Height: 5.178 (132)*
Outer Diameter Top: 3.66 (93)*
Outer Diameter Bottom: Closed:
Thread Size: 13/16-16
By-Pass Valve Setting-PSI: None
Anti-Drain Back Valve: Yes
Beta Ratio: 2/20=6/20
Burst Pressure-PSI: 270
Max Flow Rate: 9-11 GPM
Nominal Micron Rating: 21

Part Number: 1061
UPC Number: 765809135918
Style: Spin-On Lube Filter
Service: Lube
Type: Full Flow
Media: Enhanced Cellulose
Height: 5.178 (132)*
Outer Diameter Top: 3.66 (93)*
Outer Diameter Bottom: Closed:
Thread Size: 13/16-16
By-Pass Valve Setting-PSI: None
Beta Ratio: 2/20=6/20
Burst Pressure-PSI: 285
Max Flow Rate: 9-11 GPM
Nominal Micron Rating: 21

[jturner18]

Thanks for the reply!

[TJ's Chevy]

Originally Posted by GRX

Was curious so looked up both on the NAPA website. Seems they are exactly the same except the 1061 has a higher burst pressure and lacks an anti drain back valve.

http://www.nfhconnect.com/Home

That's what I couldn't remember...The Anti Drain Back valve. I remember going for a 1060 but the 1061 was all they had in stock at the time. lol