|
11-24-2015, 10:11 PM
|
#1 |
|
Registered User
Join Date: Nov 2015
Location: marrero louisiana
Posts: 9
|
locks
I can't lock my doors in the closed position with key . please help! If i lock by hand then close door it unlocks upon closing doors.
Last edited by quentin; 11-24-2015 at 10:33 PM. |
|
|
|
11-24-2015, 10:38 PM
|
#2 |
|
Senior Member
 
Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 6,284
|
Re: locks
Why can't you use the key?
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear |
|
|
|
|
11-24-2015, 11:05 PM
|
#3 |
|
The Older Generation
  
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,515
|
Re: locks
-
They are designed not to lock by pushing the button down and closing the door so no problem there. Are you sure your ignition lock cylinder hasn't been changed and the key will not fit the doors? LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
11-25-2015, 12:40 AM
|
#4 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: locks
With door open will the key turn in the lock cylinder? If so close the door with it unlocked and while turning the key push in on the door. If it locks then you will need to adjust the strikers and possibly the door itself to get them to lock!
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
