Gutters - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**slepysal** · 11-26-2015, 03:40 PM

So my 1960 has no rain gutter "dimple" to allow the water to drain. I don't want to fill them.
I was thinking of drilling a small hole in a corner to help therm drain.
Dose any one have a better idea or solution?
thanks in advance

'63GENIII · 11-27-2015, 12:10 PM

Mine has a small hole that looks like it was punched. Want me to get a pic of it for you? If it were me, I'd drill it.

'63GENIII · 11-27-2015, 12:33 PM

Got bored and took a pic. Kind of a weird shape hole.

jonzcustomshop · 11-27-2015, 12:41 PM

my suburban and later trucks have those same holes, probably an "improvement" that gm did- maybe people were complaining about water just sitting in the gutter?

**slepysal** · 11-27-2015, 12:47 PM

Thanks for the pics. I've seen those on later models and I agree they were added on to clear the drip rails.
Ok I ll drill a hole paint it and see what happens thanks again.

'63GENIII · 11-27-2015, 12:48 PM

Taking the pictures just reminded me that I have to seam seal my gutters... which means getting the rust out of the gutters first. UGGHH!

65 C20 · 11-27-2015, 01:07 PM

Was just wondering if there was just the 2 holes, 1 on each side or is there ones by the front two ?
The reason I am asking is that the PO put sealer up there and blocked off the back holes.

'63GENIII · 11-27-2015, 01:43 PM

Quote:

Originally Posted by 65 C20

Was just wondering if there was just the 2 holes, 1 on each side or is there ones by the front two ?
The reason I am asking is that the PO put sealer up there and blocked off the back holes.

I just looked again. No holes in front. The PO of mine took all of the seam sealer out so I can pretty much see all of the gutters.... and the rust! Luckily its not rot yet. Still gives me anxiety when I think about it though.

65 C20 · 11-27-2015, 02:13 PM

Quote:

Originally Posted by '63GENIII

I just looked again. No holes in front. The PO of mine took all of the seam sealer out so I can pretty much see all of the gutters.... and the rust! Luckily its not rot yet. Still gives me anxiety when I think about it though.

Thanks 63 GENIII.
I will drill out the sealer and touch up the paint.

jonzcustomshop · 11-27-2015, 02:21 PM

Quote:

Originally Posted by 65 C20

Was just wondering if there was just the 2 holes, 1 on each side or is there ones by the front two ?
The reason I am asking is that the PO put sealer up there and blocked off the back holes.

I will have to double check, but I think my 65 has holes above the rain gutter on the front post, and in the back like the ones pictured.-4 total

scuderia · 11-27-2015, 02:27 PM

4 holes, two on each side front and back.... as the photos shows a little more like a slot ( i put a zip tie in mine when resealing to keep clear).

'63GENIII · 11-27-2015, 02:28 PM

Quote:

Originally Posted by scuderia

4 holes, two on each side front and back.... as the photos shows a little more like a slot ( i put a zip tie in mine when resealing to keep clear).

I like the zip tie idea. Thats a good one!

11-26-2015, 03:40 PM	#1
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Gutters So my 1960 has no rain gutter "dimple" to allow the water to drain. I don't want to fill them. I was thinking of drilling a small hole in a corner to help therm drain. Dose any one have a better idea or solution? thanks in advance __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

11-27-2015, 12:10 PM	#2
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: Gutters Mine has a small hole that looks like it was punched. Want me to get a pic of it for you? If it were me, I'd drill it. __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

11-27-2015, 12:33 PM	#3
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: Gutters Got bored and took a pic. Kind of a weird shape hole. Attached Images __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

11-27-2015, 12:41 PM	#4
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: Gutters my suburban and later trucks have those same holes, probably an "improvement" that gm did- maybe people were complaining about water just sitting in the gutter? __________________ 60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955

11-27-2015, 12:47 PM	#5
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Gutters Thanks for the pics. I've seen those on later models and I agree they were added on to clear the drip rails. Ok I ll drill a hole paint it and see what happens thanks again. __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

11-27-2015, 12:48 PM	#6
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: Gutters Taking the pictures just reminded me that I have to seam seal my gutters... which means getting the rust out of the gutters first. UGGHH! __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

11-27-2015, 01:07 PM	#7
65 C20 Registered User Join Date: Nov 2013 Location: Comox BC Posts: 337	Re: Gutters Was just wondering if there was just the 2 holes, 1 on each side or is there ones by the front two ? The reason I am asking is that the PO put sealer up there and blocked off the back holes.

11-27-2015, 02:27 PM	#11
scuderia Registered User Join Date: May 2014 Location: SAN FRANCISCO Posts: 447	Re: Gutters 4 holes, two on each side front and back.... as the photos shows a little more like a slot ( i put a zip tie in mine when resealing to keep clear). __________________ '66 C10 SWB '64 C2 roadster '38 Indian Scout Flattracker '70 Triumph T120R '81 Laverda Jota



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.