![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Modular front disk set up interchanges?
Im doing the 4 wheels disk on this 67 truck and already have the Wilwood in back. The front already had a setup off a 72 so I installed the disks and calipers to the updated CPP drop spindles CP4S-2 that allowed the factory 67 steering linkage.
What I want to do is find something 5 lug from like a Camaro or something that has modular hubs and disks that will work with the CPP spindles and factory replacement Wilwood calipers. I want to do drilled and slotted rotors to match the rear. Wilwood only sells the modulars in a big brake kit and is way expensive. I plan on running the chrome 15" corvette rally wheels I already have. Does anyone know what will work and have the same lug pattern that will still use the factory replacement calipers from Wilwood? Any input is greatly appreciated.
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Feb 2014
Location: Los Angeles area :(
Posts: 499
|
Re: Modular front disk set up interchanges?
check EBC for the hell of it too
__________________
'68 C10 SWB '85 K30 Blazer |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Modular front disk set up interchanges?
Didnt see anything in EBC...
This is frustrating... There HAS to be a modular kit that uses factory replacement calipers and factory diameter rotors somewhere. I Just need the Hubs is all I need as Im sure I could find drilled and slotted rotors and would be able to use Wilwood factory replacement 2 or 4 piston calipers... ![]()
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
![]() |
![]() |
![]() |
#4 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
![]()
Want the older big Impala SS hubs work. They are the same as a 5 lug Chevy truck.
![]()
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 ![]() Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
![]() |
![]() |
![]() |
#5 | |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Modular front disk set up interchanges?
Quote:
Thanks for the reply option
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|