Gas Pedal Options - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BigSix · 12-02-2015, 11:31 AM

Curious if anyone has had to come up with a different way to run the throttle pedal. My stock pedal on the GMC, which I assume is the same on the Chevys, is too far toward the passenger side for my engine swap. A cable setup would be the ideal. Is there a cable setup that can be found at an average junkyard that works with fabrication? Our junkyards don't have any 60-66 and almost no 67+ but usually can find some 80's GM. Thanks in advance.

**slepysal** · 12-02-2015, 11:48 AM

try this
http://persh.org/Pickup/CableThrottle.htm

BigSix · 12-02-2015, 12:07 PM

Thank you. I saw that when I did a search but unfortunately haven't seen a 71-72 in any junkyard (probably a good thing!).

**slepysal** · 12-02-2015, 12:37 PM

No problem !
I went with a used "spoon " type pedal and a cable /bracket from then Kragans now O'rileys

I used a pedal out of a F150 on my old 53 wagon that worked fine.
You can try going to pick a pull and see what you can find too

**TJ's Chevy** · 12-02-2015, 01:10 PM

Lokar is what I used. Darn sweet setup.

**Captainfab** · 12-03-2015, 01:41 AM

I don't think you would absolutely have to use a pedal assembly form a '71-'72. I don't see why an assembly from a '73-'87 wouldn't work. It looks nearly the same as the '71-'72.

Quote:

Originally Posted by BigSix

Thank you. I saw that when I did a search but unfortunately haven't seen a 71-72 in any junkyard (probably a good thing!).

BigSix · 12-03-2015, 11:03 AM

Thanks all - I will try to find an 80s chevy truck pedal to check out.

reaper71 · 12-03-2015, 11:13 AM

Try A late 80's or early 90's gas pedal I found one at a swap meet for 5$ and worked perfectly! aka Throttle body type with cable.

Mark...

**MikeN** · 12-03-2015, 11:41 AM

Quote:

Originally Posted by TJ's Chevy

Lokar is what I used. Darn sweet setup.

I went to Lokar's website and only found a pedal for 67-72 C10's. Did you adapt the 67-72 unit to your 64? If so was that very difficult?

**Palf70Step** · 12-03-2015, 01:54 PM

Quote:

Originally Posted by TJ's Chevy

Lokar is what I used. Darn sweet setup.

Quote:

Originally Posted by MikeN

I went to Lokar's website and only found a pedal for 67-72 C10's. Did you adapt the 67-72 unit to your 64? If so was that very difficult?

Yes TJ, inquiring minds want to know?

**The Rocknrod** · 12-03-2015, 02:05 PM

Lokar makes one that will fit as well as the 70's model gas pedal: http://www.ebay.com/itm/Lokar-XBAG-6...JVchWH&vxp=mtr
They also make the same unit not black. But I think I will be using the black one. I have a 72 gas pedal to use but I'm not at home for a few months.

12-02-2015, 11:31 AM	#1
BigSix Registered User Join Date: Mar 2014 Location: MD/VA/PA Or Inbetween Posts: 413	Gas Pedal Options Curious if anyone has had to come up with a different way to run the throttle pedal. My stock pedal on the GMC, which I assume is the same on the Chevys, is too far toward the passenger side for my engine swap. A cable setup would be the ideal. Is there a cable setup that can be found at an average junkyard that works with fabrication? Our junkyards don't have any 60-66 and almost no 67+ but usually can find some 80's GM. Thanks in advance.

12-02-2015, 11:48 AM	#2
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Gas Pedal Options try this http://persh.org/Pickup/CableThrottle.htm __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

12-02-2015, 12:07 PM	#3
BigSix Registered User Join Date: Mar 2014 Location: MD/VA/PA Or Inbetween Posts: 413	Re: Gas Pedal Options Thank you. I saw that when I did a search but unfortunately haven't seen a 71-72 in any junkyard (probably a good thing!).

12-02-2015, 12:37 PM	#4
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Gas Pedal Options No problem ! I went with a used "spoon " type pedal and a cable /bracket from then Kragans now O'rileys I used a pedal out of a F150 on my old 53 wagon that worked fine. You can try going to pick a pull and see what you can find too __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

12-02-2015, 01:10 PM	#5
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Gas Pedal Options Lokar is what I used. Darn sweet setup. Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

12-03-2015, 11:03 AM	#7
BigSix Registered User Join Date: Mar 2014 Location: MD/VA/PA Or Inbetween Posts: 413	Re: Gas Pedal Options Thanks all - I will try to find an 80s chevy truck pedal to check out.

12-03-2015, 11:13 AM	#8
reaper71 Registered User Join Date: Nov 2011 Location: West Plains Missouri Posts: 2,088	Re: Gas Pedal Options Try A late 80's or early 90's gas pedal I found one at a swap meet for 5$ and worked perfectly! aka Throttle body type with cable. Mark... __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=645774 Project Orangepeel 52 A.D. http://67-72chevytrucks.com/vboard/s...d.php?t=653337 John's LS 49 dodge http://67-72chevytrucks.com/vboard/s...d.php?t=655780 Blake's 67 GMC LS stepside http://67-72chevytrucks.com/vboard/s...d.php?t=690527 Reed 78 FJ40 Rebuild http://67-72chevytrucks.com/vboard/s...d.php?t=733259 Barger's 78 FJ40

12-03-2015, 02:05 PM	#11
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Gas Pedal Options Lokar makes one that will fit as well as the 70's model gas pedal: http://www.ebay.com/itm/Lokar-XBAG-6...JVchWH&vxp=mtr They also make the same unit not black. But I think I will be using the black one. I have a 72 gas pedal to use but I'm not at home for a few months. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.