|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-05-2015, 03:46 PM
|
#1 |
|
Registered User
Join Date: Oct 2014
Location: Ontario
Posts: 136
|
Four gen camaro sub frame in 55 2nd gen
Hello
Anyone ever heard of putting a sub frame out or front end out of a four generation camaro for 1999 because the track width is the same 60.5 ? I know the tird one is common done but why not the four? Am I missing something? Thanks |
|
|
|
12-05-2015, 04:03 PM
|
#2 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,404
|
Re: Four gen camaro sub frame in 55 2nd gen
A gen 4 Camaro does not have a usable or removable subframe as far as being able to swap the pieces over to a truck as is done with Gen 1 or Gen 2 will.
Gen 3 and later Camaros have what amounts to a unibody with the suspension pieces bolted on and both use struts that mount up into what amounts to the inner fender. Outside of the spindles, brakes and rack and pinion this is what you have for Gen 4 suspension. This being performance pieces from Jegs. http://www.jegs.com/i/Chevrolet+Perf...4TpBoCpg_w_wcB
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
