17's or 20's.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shortbed70 · 12-13-2015, 03:18 PM

Needing pics to decide what way to go!!! Want to fill the wheel well but don't want to big and still be able to lay out... Can't decide which route to go between 17 or 20's so needin some pics of bagged 17's and 20's please and tire sizes if possible. I know on 17's was gonna run 245-45-17

theastronaut · 12-13-2015, 04:01 PM

Don't have 17's, but this is 245/45 on 18's. Frame is about an inch off the ground.

**LostMy65** · 12-13-2015, 04:13 PM

Here's a stepside with 18"s.
http://Www.67-72chevytrucks.com/vboa...13#post7266513

shortbed70 · 12-13-2015, 04:15 PM

Guess I should've said stock inner fenders too lol... 18's aren't out just thinking of cheaper tire options..

LVPhotos · 12-13-2015, 05:06 PM

Laying out is not happening with inner fenders. Here is a Sub on 20s. Me 245/45/18 and 295/45/18
See pictures threads!
http://67-72chevytrucks.com/vboard/s...d.php?t=635064

shortbed70 · 12-13-2015, 05:14 PM

My truck doesn't lay frame. Stock front suspension with 1.5" dropped control arm pockets. Just like the sub. Mine sits about 4-5" higher than the gray truck

61_FL_Apache · 12-13-2015, 07:03 PM

I would rather run with 17's and a little more tire then 20's with rubber bands. Both sizes keeping the same overall tire height.

**Palf70Step** · 12-13-2015, 07:41 PM

This is a friend's truck (62 short step on board)

static drop is 4.5/6
17x7 wheels in front and 17x7 rear. If I remember right the tires are
F-255/50 R-275/50

12-13-2015, 03:18 PM	#1
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	17's or 20's.... Needing pics to decide what way to go!!! Want to fill the wheel well but don't want to big and still be able to lay out... Can't decide which route to go between 17 or 20's so needin some pics of bagged 17's and 20's please and tire sizes if possible. I know on 17's was gonna run 245-45-17 __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

12-13-2015, 04:01 PM	#2
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,881	Re: 17's or 20's.... Don't have 17's, but this is 245/45 on 18's. Frame is about an inch off the ground. __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

12-13-2015, 04:13 PM	#3
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,525	Re: 17's or 20's.... Here's a stepside with 18"s. http://Www.67-72chevytrucks.com/vboa...13#post7266513 __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

12-13-2015, 04:15 PM	#4
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: 17's or 20's.... Guess I should've said stock inner fenders too lol... 18's aren't out just thinking of cheaper tire options.. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

12-13-2015, 05:06 PM	#5
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,853	Re: 17's or 20's.... Laying out is not happening with inner fenders. Here is a Sub on 20s. Me 245/45/18 and 295/45/18 See pictures threads! http://67-72chevytrucks.com/vboard/s...d.php?t=635064 Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081 Last edited by LVPhotos; 12-13-2015 at 05:17 PM.

12-13-2015, 05:14 PM	#6
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: 17's or 20's.... My truck doesn't lay frame. Stock front suspension with 1.5" dropped control arm pockets. Just like the sub. Mine sits about 4-5" higher than the gray truck __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

12-13-2015, 07:03 PM	#7
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: 17's or 20's.... I would rather run with 17's and a little more tire then 20's with rubber bands. Both sizes keeping the same overall tire height. __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

12-13-2015, 07:41 PM	#8
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,762	Re: 17's or 20's.... This is a friend's truck (62 short step on board) static drop is 4.5/6 17x7 wheels in front and 17x7 rear. If I remember right the tires are F-255/50 R-275/50 Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 12-15-2015 at 06:33 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.