72 LS3 swap Mounts questions

[Chrisbeds82]

Originally Posted by First c10

Not sure about the headers your asking about but in a c10 I used early classic enterprises Pedestals and mounts. I also used there transmission cross member. Bolted right in with no issues. I used shorty headers.

I went ahead and got the dirty dingo sliders just for the ease of moving things around a little. Also called Travis at pro performance and got the porter built cross member for the trans. I don't think my stock one is going to work.

My motor is going to be a beast and flow a ton of air so I'm wanting together the biggest headers possible. There seems to be a lot of short and mid length headers that will work. Wanting to get at least 1 7/8" mid length.

[kehstr]

what style water pump are you using, I've done enough swaps myself that i can help you with what you need for the front accessory

[Chrisbeds82]

Originally Posted by kehstr

what style water pump are you using, I've done enough swaps myself that i can help you with what you need for the front accessory

It's the corvette style.