V8 Fun - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TCLARK · 12-18-2015, 03:08 PM

Finally got my I6 replaced with V8 ( 40 over 350, flat top pistons, 202 heads, roller tip rockers, Weiand Intake, Quadrajet, HEI, Headers with Hurst 4Speed. I put dual Glasspacks , balance tube & turndowns just over 410 Posi rearend. I think I could take off in 3rd............Merry Christmas to me !

**Boog** · 12-18-2015, 03:12 PM

Sounds like a good package. Have fun.

leftybass209 · 12-18-2015, 03:18 PM

Quote:

Originally Posted by TCLARK

Finally got my I6 replaced with V8 ( 40 over 350, flat top pistons, 202 heads, roller tip rockers, Weiand Intake, Quadrajet, HEI, Headers with Hurst 4Speed. I put dual Glasspacks , balance tube & turndowns just over 410 Posi rearend. I think I could take off in 3rd............Merry Christmas to me !

Where are the pictures of this mythical beast you installed, I don't believe you

Here's to many filled gas tanks!!!!

TCLARK · 12-18-2015, 03:31 PM

Quote:

Originally Posted by leftybass209

Where are the pictures of this mythical beast you installed, I don't believe you

Here's to many filled gas tanks!!!!

Frankenstien is a little camera shy ! '67 GMC Cab on '72SWB Chevy Frame !

snipescastle2 · 12-18-2015, 04:21 PM

Everyone that you pass will be yelling "Shift" !!!!!
I had a 69 Camaro with a built 355 with a 4:88 12 bolt posi and a Muncie 4 speed, that's what they were yelling at me going down the highway at 4500 rpm's!!!!
Those were the days.......

Ben

**Boog** · 12-18-2015, 04:36 PM

Quote:

Originally Posted by snipescastle2

Everyone that you pass will be yelling "Shift" !!!!!
I had a 69 Camaro with a built 355 with a 4:88 12 bolt posi and a Muncie 4 speed, that's what they were yelling at me going down the highway at 4500 rpm's!!!!
Those were the days.......

Ben

Back when gas was cheap and overdrive was almost unheard of.

leftybass209 · 12-18-2015, 05:23 PM

Quote:

Originally Posted by Boog

Back when gas was cheap and overdrive was almost unheard of.

Fortunately gas is tolerable right now! If it didn't go bad or go boom, i'd load up some 50 Gal drums for my garage.

TCLARK · 12-18-2015, 05:58 PM

Quote:

Originally Posted by snipescastle2

Everyone that you pass will be yelling "Shift" !!!!!
I had a 69 Camaro with a built 355 with a 4:88 12 bolt posi and a Muncie 4 speed, that's what they were yelling at me going down the highway at 4500 rpm's!!!!
Those were the days.......

Ben

Overdrive would be sweet !

12-18-2015, 03:08 PM	#1
TCLARK Registered User Join Date: Jun 2009 Location: COOKEVILLE,TN Posts: 151	V8 Fun Finally got my I6 replaced with V8 ( 40 over 350, flat top pistons, 202 heads, roller tip rockers, Weiand Intake, Quadrajet, HEI, Headers with Hurst 4Speed. I put dual Glasspacks , balance tube & turndowns just over 410 Posi rearend. I think I could take off in 3rd............Merry Christmas to me !

12-18-2015, 03:12 PM	#2
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,535	Re: V8 Fun Sounds like a good package. Have fun. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

12-18-2015, 04:21 PM	#5
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: V8 Fun Everyone that you pass will be yelling "Shift" !!!!! I had a 69 Camaro with a built 355 with a 4:88 12 bolt posi and a Muncie 4 speed, that's what they were yelling at me going down the highway at 4500 rpm's!!!! Those were the days....... Ben



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.