WTB TH400 / 700R4 for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67_SS396 · 02-22-2004, 10:06 PM

I am looking for a TH400 for my '67, prefer local or close to DFW with in reason.

I had an '87 model 700R4 built close to 12 months ago for the same truck. However, since I bought the '70, the '67 will now only be a weekend cruiser/racer and don't want to take a chance with trashing the 700. I have $1000+/- in the tranny and was built by a reputable local shop. I have all the paper work from when it was built along with extra govenor springs. The Bowtie Overdrives TV Made EZ kit goes with the tranny and a 2200 stall. The tranny has less than 1000 miles on it. My loss is your gain, I'd like to get $500 for the whole package but am willing to deal, no shipping. However, I will help deliver with in a reasonable distance from the DFW area. I would consider working out a trade for a TH-400. No warranty on the transmission.

Thanks,

Ryan

Longhorn Man · 02-22-2004, 10:47 PM

Wow...bummer I ain't still at Ft Hood.

FirstGen · 02-23-2004, 02:05 AM

I'm interested but I think my truck has a TH-350

Maybe we can still work something out... What all is involved in switching over to a 700r4 do I just need a different driveshaft?
Thanks

SCOTI · 02-23-2004, 02:06 AM

Ryan, I believe I've got a short tailshaft 400 sitting in a corner of the garage. I got it from a guy I work with in a pkg deal & was told it was a working trans when pulled from the project vehicle but I can't be 100% as I never actually had it in one of my trucks.

I possibly even have the correct yoke that came w/it. Sound like what your after? What kind of deal would this be worth to you?

67_SS396 · 02-23-2004, 02:14 AM

I really want a 400, so that's the plan I'm going to stick with. I want to build it once and be done.

First Gen, it's a pretty straight forward swap. Move the tranny crossmember back a couple inches, shorten/balance the driveshaft and bolt it up. I have the tranny setup for a toggle switch lockup, so that's real easy. With the Bowtie Overdrive setup, the TV cable is a no brainer to set up. I really like the design of that kit.

Scoti, that's exactly what I'm looking for. If you don't mind, PM me your number and we'll chat.

SCOTI · 02-23-2004, 02:20 AM

You have PM..... good night.

FirstGen · 02-23-2004, 02:40 AM

Sounds good I'm real interested... If Scoti doesn't take it off your hands talk to me.
Later

SCOTI · 02-26-2004, 02:16 AM

Thanks Ryan. I hope to get together again & maybe enjoy some racing.

67_SS396 · 02-27-2004, 10:16 AM

Thank you for the 400 Scot! I'll definately give you a shout when we head out to the track. It shouldn't be long now.

02-22-2004, 10:06 PM	#1
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	WTB TH400 / 700R4 for sale I am looking for a TH400 for my '67, prefer local or close to DFW with in reason. I had an '87 model 700R4 built close to 12 months ago for the same truck. However, since I bought the '70, the '67 will now only be a weekend cruiser/racer and don't want to take a chance with trashing the 700. I have $1000+/- in the tranny and was built by a reputable local shop. I have all the paper work from when it was built along with extra govenor springs. The Bowtie Overdrives TV Made EZ kit goes with the tranny and a 2200 stall. The tranny has less than 1000 miles on it. My loss is your gain, I'd like to get $500 for the whole package but am willing to deal, no shipping. However, I will help deliver with in a reasonable distance from the DFW area. I would consider working out a trade for a TH-400. No warranty on the transmission. Thanks, Ryan __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

02-23-2004, 02:05 AM	#3
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	I'm interested but I think my truck has a TH-350 Maybe we can still work something out... What all is involved in switching over to a 700r4 do I just need a different driveshaft? Thanks __________________ 1968 C10 build in process TT LSA/6L90e/9"

02-23-2004, 02:06 AM	#4
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,984	Ryan, I believe I've got a short tailshaft 400 sitting in a corner of the garage. I got it from a guy I work with in a pkg deal & was told it was a working trans when pulled from the project vehicle but I can't be 100% as I never actually had it in one of my trucks. I possibly even have the correct yoke that came w/it. Sound like what your after? What kind of deal would this be worth to you? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

02-23-2004, 02:14 AM	#5
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	I really want a 400, so that's the plan I'm going to stick with. I want to build it once and be done. First Gen, it's a pretty straight forward swap. Move the tranny crossmember back a couple inches, shorten/balance the driveshaft and bolt it up. I have the tranny setup for a toggle switch lockup, so that's real easy. With the Bowtie Overdrive setup, the TV cable is a no brainer to set up. I really like the design of that kit. Scoti, that's exactly what I'm looking for. If you don't mind, PM me your number and we'll chat. __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

02-23-2004, 02:20 AM	#6
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,984	You have PM..... good night. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

02-22-2004, 10:47 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Wow...bummer I ain't still at Ft Hood.

02-23-2004, 02:40 AM	#7
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	Sounds good I'm real interested... If Scoti doesn't take it off your hands talk to me. Later __________________ 1968 C10 build in process TT LSA/6L90e/9"

02-26-2004, 02:16 AM	#8
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,984	Thanks Ryan. I hope to get together again & maybe enjoy some racing. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

02-27-2004, 10:16 AM	#9
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	Thank you for the 400 Scot! I'll definately give you a shout when we head out to the track. It shouldn't be long now. __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.