![]() |
![]() |
#10 |
Registered User
Join Date: Mar 2008
Location: Waukee, Iowa
Posts: 1,608
|
Re: Seam Rust
That's what made my project take way longer than I wanted it to.....
On mine I made a judgement call. If the rust was swelling the seam I cut it apart and cleaned it and put it back together. Some of the seams I used weld through primer, some I used POR 15 and then ground clean where the spot welds went, and some I left bare and relied on my seam sealing and epoxy primer to take care of. In my opinion, you have to decide how deep you want to go and stop there.
__________________
build threads: 86 Suburban 88 Jeep 6.0 swap 49 Chevy truck 54 Chevy wagon 86 Suburban lowered 4/6 54 Chevy wagon 49 Chevy/s10 mix 88 Jeep Wrangler rockcrawler |
![]() |
![]() |
Bookmarks |
|
|