Are the 3/4 ton Eaton axles impossible to find parts for? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

joeydurango · 12-28-2015, 11:27 PM

Looking at a K20 with an Eaton rear axle. I've heard these are difficult/impossible to find parts for, even brake-wise. True? False? Sorta? Input appreciated!

**special-K** · 12-29-2015, 11:09 AM

Some parts are not available new, such as ring & pinion gear sets, but brake parts are as mainstream available as they are for any vehicle. There are plenty of used axles to buy from those who replace them ASAP with 14-bolts after listening to the myths. Lots of good used parts out there still.

joeydurango · 12-29-2015, 01:39 PM

Thanks Tim!

davepl · 12-29-2015, 01:54 PM

I would check with:

Randy's Ring and Pinion
Northwest Differential

I just saw a cast-aluminum 1929 Allistair rear end come back from one of those, so they should be able to deal with a 1970 truck they made millions of!

mike16 · 01-03-2016, 08:07 PM

when you did a search here and in the drive train section what did you discover?

12-28-2015, 11:27 PM	#1
joeydurango Registered User Join Date: Dec 2013 Location: Durango, CO Posts: 827	Are the 3/4 ton Eaton axles impossible to find parts for? Looking at a K20 with an Eaton rear axle. I've heard these are difficult/impossible to find parts for, even brake-wise. True? False? Sorta? Input appreciated! __________________ 1972 K10 Cheyenne Super \| LWB, fleetside \| 350/350/205 \| KEEPER 1971 K10 Cheyenne \| SWB, fleetside \| LS Swap 5.3/4L60 \| SOLD 1976 Trans Am \| 400/4-spd \| SOLD 1976 Trans Am \| 455/4-spd \| TOTALED

12-29-2015, 11:09 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Are the 3/4 ton Eaton axles impossible to find parts for? Some parts are not available new, such as ring & pinion gear sets, but brake parts are as mainstream available as they are for any vehicle. There are plenty of used axles to buy from those who replace them ASAP with 14-bolts after listening to the myths. Lots of good used parts out there still. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-29-2015, 01:39 PM	#3
joeydurango Registered User Join Date: Dec 2013 Location: Durango, CO Posts: 827	Re: Are the 3/4 ton Eaton axles impossible to find parts for? Thanks Tim! __________________ 1972 K10 Cheyenne Super \| LWB, fleetside \| 350/350/205 \| KEEPER 1971 K10 Cheyenne \| SWB, fleetside \| LS Swap 5.3/4L60 \| SOLD 1976 Trans Am \| 400/4-spd \| SOLD 1976 Trans Am \| 455/4-spd \| TOTALED

12-29-2015, 01:54 PM	#4
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Re: Are the 3/4 ton Eaton axles impossible to find parts for? I would check with: Randy's Ring and Pinion Northwest Differential I just saw a cast-aluminum 1929 Allistair rear end come back from one of those, so they should be able to deal with a 1970 truck they made millions of! __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

01-03-2016, 08:07 PM	#5
mike16 Registered User Join Date: Dec 2009 Location: bisbee, arizona Posts: 1,529	Re: Are the 3/4 ton Eaton axles impossible to find parts for? when you did a search here and in the drive train section what did you discover?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.