Should it stay or should it go? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**SoCoC10** · 08-22-2015, 11:05 PM

My 67 C20 to C10 is going to have the frame and steel floor shortened next week and new bed sides installed. In the meantime, I found this truck in New Mexico and after a quick trip with the trailer brought her home. All new bed sides and front fenders she's pretty straight. Not sure if I'll keep the 67 farm truck or the 72 black beauty?

**SoCoC10** · 08-22-2015, 11:15 PM

Here's my patina white 67 that's getting the frame shortened new bed sides and 20X10 rear Boss 338's. What do you think? Keep the white one or the black one?

69chevytrucker · 08-23-2015, 12:20 AM

the boy who dies with the most toys wins

cooperhw · 08-23-2015, 09:34 AM

I like the "LOOK" of the black truck better, but can/would you haul anything in the bed? whereas the white truck is a truck including the wheelbarrow in the back. No matter what mine junk ends up looking like, from now on it still has the be a truck. Went down that road years ago. No more.
So, I would pick the black truck and slide the wheelbarrow in the bed.

**68bowtie** · 08-23-2015, 10:38 AM

i'm partial to 67-68's but that 72 is nice.

**SoCoC10** · 09-03-2015, 08:48 AM

What a difference some 3" front drop spindles, 5" CPP rear drop springs, spring relocaters, an adjustable pan hard bar, 20 X 10" resr rims and a pair of 295/40/20 can make!

Becker67 · 09-03-2015, 10:41 AM

They are both very nice trucks. If it were me I would just have to keep them both.

flashed · 09-03-2015, 12:42 PM

Id keep them both .

trac209 · 09-03-2015, 03:42 PM

If you call off the long bed cutting I'd keep both

sighlurr · 12-16-2015, 10:01 PM

Quote:

Originally Posted by SoCoC10

What a difference some 3" front drop spindles, 5" CPP rear drop springs, spring relocaters, an adjustable pan hard bar, 20 X 10" resr rims and a pair of 295/40/20 can make!

Truck looks good. What is the rear backspace on your 20x10's?

Odaroloc · 12-18-2015, 08:20 PM

If you're set on letting one go for sure, id keep the 67, but im a bit partial to long beds :P Long and low

**Elliot949** · 12-19-2015, 05:47 PM

I am a 67/68 Fan... but the 72 is a nice looking truck... But for me I would charge forward with the 67...

ElKotze · 12-19-2015, 09:34 PM

I'd keep the '67, just because it's a driver and not a show truck!

swamp rat · 12-19-2015, 09:46 PM

Being as you were gonna shorten the 67 to make it what you wanted you may as well just keep the 72. I wish i could take that 67 off your hands but shipping would be a killer..

mooseknuckles · 01-03-2016, 05:23 PM

In my biased opinion I'd keep the '67....

**SoCoC10** · 01-04-2016, 11:17 AM

Backspace on the rear 20X10s is 5.5"

08-22-2015, 11:05 PM	#1
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,355	Should it stay or should it go? My 67 C20 to C10 is going to have the frame and steel floor shortened next week and new bed sides installed. In the meantime, I found this truck in New Mexico and after a quick trip with the trailer brought her home. All new bed sides and front fenders she's pretty straight. Not sure if I'll keep the 67 farm truck or the 72 black beauty? Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

08-22-2015, 11:15 PM	#2
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,355	Re: Should it stay or should it go? Here's my patina white 67 that's getting the frame shortened new bed sides and 20X10 rear Boss 338's. What do you think? Keep the white one or the black one? Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

08-23-2015, 12:20 AM	#3
69chevytrucker Registered User Join Date: Apr 2014 Location: calgary alberta Posts: 1,248	Re: Should it stay or should it go? the boy who dies with the most toys wins

08-23-2015, 09:34 AM	#4
cooperhw Registered User Join Date: Oct 2014 Location: Mesa AZ (Near Phoenix) Posts: 2,303	Re: Should it stay or should it go? I like the "LOOK" of the black truck better, but can/would you haul anything in the bed? whereas the white truck is a truck including the wheelbarrow in the back. No matter what mine junk ends up looking like, from now on it still has the be a truck. Went down that road years ago. No more. So, I would pick the black truck and slide the wheelbarrow in the bed. __________________ "Life is too short to drive a boring vehicle". Later, Wayne

08-23-2015, 10:38 AM	#5
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,822	Re: Should it stay or should it go? i'm partial to 67-68's but that 72 is nice. __________________ Project "C10 Fever" (68 factory black 396 swb) Project “Faded Glory” (71 c10 med bronze original paint refresh) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

09-03-2015, 08:48 AM	#6
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,355	Re: Should it stay or should it go? What a difference some 3" front drop spindles, 5" CPP rear drop springs, spring relocaters, an adjustable pan hard bar, 20 X 10" resr rims and a pair of 295/40/20 can make! Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

09-03-2015, 10:41 AM	#7
Becker67 Registered User Join Date: Jan 2009 Location: Pueblo West, Colorado Posts: 265	Re: Should it stay or should it go? They are both very nice trucks. If it were me I would just have to keep them both. __________________ Kevin 67 custom cab big window swb 350/700r4 4/6 drop tilt,a/c 69 custom/10 swb 350/350 4/6 drop tach,tilt 71 cheyenne super swb 454/700r4 4/6drop tach,tilt,a/c,bucket seats,speed warning 96 gmc swb

09-03-2015, 12:42 PM	#8
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Should it stay or should it go? Id keep them both .

09-03-2015, 03:42 PM	#9
trac209 Registered User Join Date: Dec 2011 Location: winnipeg Posts: 1,107	Re: Should it stay or should it go? If you call off the long bed cutting I'd keep both

12-18-2015, 08:20 PM	#11
Odaroloc Registered User Join Date: Aug 2011 Location: Wasilla, Alaska Posts: 168	Re: Should it stay or should it go? If you're set on letting one go for sure, id keep the 67, but im a bit partial to long beds :P Long and low __________________ 1971 GMC Sierra Grande 2500 2wd "Sadiee" Caddy 472/TH400 Project "Sadiee" 1969 Chevy C/10 Build "Maisie" Thread coming soon

12-19-2015, 05:47 PM	#12
Elliot949 Registered User Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: Should it stay or should it go? I am a 67/68 Fan... but the 72 is a nice looking truck... But for me I would charge forward with the 67... __________________ Dan Johnston... Owner of My Dad's- '67 Chevy C-20 Custom Camper Short Fleetside Pickup PAPA J And our newest addition a- '71 Chevy CST/10 Short Fleetside Pickup Haulin' SOLD Papa J's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=612847 Haulin's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=671130SOLD B Bears Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=744210

12-19-2015, 09:34 PM	#13
ElKotze Registered User Join Date: Nov 2014 Location: Southwest Kansas Posts: 306	Re: Should it stay or should it go? I'd keep the '67, just because it's a driver and not a show truck!

12-19-2015, 09:46 PM	#14
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Should it stay or should it go? Being as you were gonna shorten the 67 to make it what you wanted you may as well just keep the 72. I wish i could take that 67 off your hands but shipping would be a killer.. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

01-03-2016, 05:23 PM	#15
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: Should it stay or should it go? In my biased opinion I'd keep the '67.... __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

01-04-2016, 11:17 AM	#16
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,355	Re: Should it stay or should it go? Backspace on the rear 20X10s is 5.5" __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.