![]() |
![]() |
#1 |
Registered User
![]() Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 642
|
water pump hub height
Hi, And Happy New Year to ya All
I am putting a serpentine belt system on my project. I am going to order a reverse flow pump but I want to make sure I get the right one. The one I am looking at has a hub height of 6 15/16. Will this work for me? Thanks John
__________________
Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in. |
![]() |
![]() |
![]() |
#2 |
Plays with trucks
Join Date: Sep 2003
Location: Asheville, NC
Posts: 433
|
Re: water pump hub height
Did you get this figured out? I used a JY setup on mine and ordered a water pump for a '93 pickup with a 350 and it worked fine.
__________________
Gary My Dad's Old Truck 1985 ![]() |
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 642
|
Re: water pump hub height
Thanks for replying. Yes I ordered a water pump for a 92 350 reverse flow. Did not get it yet, will dry fit it when it comes.
John
__________________
Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in. |
![]() |
![]() |
![]() |
Bookmarks |
|
|