Fender Gasket Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**The Rocknrod** · 01-14-2016, 03:48 PM

Is there a company that sells the gaskets for the front fender spacers shown below?:

forestb · 01-14-2016, 05:12 PM

for the L shaped peaces I think you are supposed to use peaces of the same whether stripping you use between the inner fenders and the fire wall. I don't think anyone sells them for the flat peaces. I think you will have to make your own.

BR3W CITY · 01-14-2016, 08:48 PM

I bought the gaskets etc in a roll from LMC if I remember. The L stuff is a different texture than you'd think when its new, its not as hard as the stuff you'll be removing. I also went and got some 3m 08475 seam sealer tape. Its a waaay better modern compound compared to old fender welting (that stuff can hold moisture) and it resists chafing and vibration.

I use it on the spots that the old "gasket" doesn't really protect. I really like it if you've altered panel fitment at all, or made changes to any of the structure (bcuz hot rodding happens) and need a way to keep it all snug and rattle free.

balesjb · 01-14-2016, 09:21 PM

LMC would your best bet.

**The Rocknrod** · 01-15-2016, 09:56 AM

Thanks guys, looks like LMC is the place.

01-14-2016, 03:48 PM	#1
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Fender Gasket Question Is there a company that sells the gaskets for the front fender spacers shown below?: __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

01-14-2016, 05:12 PM	#2
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,608	Re: Fender Gasket Question for the L shaped peaces I think you are supposed to use peaces of the same whether stripping you use between the inner fenders and the fire wall. I don't think anyone sells them for the flat peaces. I think you will have to make your own.

01-14-2016, 08:48 PM	#3
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Fender Gasket Question I bought the gaskets etc in a roll from LMC if I remember. The L stuff is a different texture than you'd think when its new, its not as hard as the stuff you'll be removing. I also went and got some 3m 08475 seam sealer tape. Its a waaay better modern compound compared to old fender welting (that stuff can hold moisture) and it resists chafing and vibration. I use it on the spots that the old "gasket" doesn't really protect. I really like it if you've altered panel fitment at all, or made changes to any of the structure (bcuz hot rodding happens) and need a way to keep it all snug and rattle free. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

01-14-2016, 09:21 PM	#4
balesjb Registered User Join Date: Feb 2015 Location: Indianapolis, IN Posts: 32	Re: Fender Gasket Question LMC would your best bet.

01-15-2016, 09:56 AM	#5
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Fender Gasket Question Thanks guys, looks like LMC is the place. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.