FITECH EFI 600 Basic and Command center intall with pics, factory tank

[bowtie72]

You mentioned a two wire dist. Does it require you to make any changes to your dist? I have installed the gm tbi systems. If you let the ECM control the timing it runs even smoother. Do they sell a dist with this kit? I put a GM TBi on my 72 K-5 and it ran great fuel mileage went from 9 to 13-15 on 35" tires. Ran great. I like these systems but still not sure about that tank up front. I should find their site and look around.

[steveo3318]

Originally Posted by bowtie72

You mentioned a two wire dist. Does it require you to make any changes to your dist? I have installed the gm tbi systems. If you let the ECM control the timing it runs even smoother. Do they sell a dist with this kit? I put a GM TBi on my 72 K-5 and it ran great fuel mileage went from 9 to 13-15 on 35" tires. Ran great. I like these systems but still not sure about that tank up front. I should find their site and look around.

Their kit requires absolutely no changes to distributor at all. You just can't control timing if you have a Msd ready to run or gm hei. I have an hei. I will be getting an Msd pro billet 2 wire soon to let the fitech run my timing.

[LostMy65]

Originally Posted by bowtie72

I like these systems but still not sure about that tank up front. I should find their site and look around.

.
I'm thinking about installing mine on the passenger side inner fender back by the heater.
Edelbrock also has a sump tank unit that many mount up front on the radiator support. Go to YouTube and watch install videos of the Holley Terminator, MSD Atomic, EZ-Fast, and the Edelbrock E-Street. Many Pump/Tank install options with or without the SumpKit/FCC.

[Lattimer]

Originally Posted by LostMy65

.
I'm thinking about installing mine on the passenger side inner fender back by the heater.
Edelbrock also has a sump tank unit that many mount up front on the radiator support. Go to YouTube and watch install videos of the Holley Terminator, MSD Atomic, EZ-Fast, and the Edelbrock E-Street. Many Pump/Tank install options with or without the SumpKit/FCC.

The Edelbrock tank looks like its a lot bigger than the FITech one. I looked at that one a while ago but couldn't see a good way to fit it without moving other stuff.

[LostMy65]

Originally Posted by Lattimer

The Edelbrock tank looks like its a lot bigger than the FITech one. I looked at that one a while ago but couldn't see a good way to fit it without moving other stuff.

.
There's a guy in these forums that made his own.
Here's a couple threads where there's been some previous discussion :
http://67-72chevytrucks.com/vboard/s...68#post7450468
.
http://67-72chevytrucks.com/vboard/s...d.php?t=686601