|
|
|
01-19-2016, 01:08 PM
|
#1 |
|
C10 Collector
Join Date: Oct 2003
Location: Baton Rouge, LA
Posts: 418
|
Re: 67 GMC Quick Build
Ive been working on the truck a good bit trying to get the chassis rolling again. This will be a daily driver when its together so Im updating all the brakes to late model stuff.
My gears were toast and one axleshaft was ate up bad. So I pulled those parts from a 65 rot-box my buddy and I have. Picked up some late model brakes and converted the axle. Also it had 2 plug welds in the chunk that were missing and one spot had a hole straight through. Welded up those holes and the axle tubes to the center section. New brake mounts made for late model disc with integrated drum parking brake  Cut off Brake mounts  New mounts installed  Welded up tubes  Installed and all together: 
__________________
///Ryan 1972 Chevy C-10-Bagged, Blown LT1, 700r4, Suicide Doors 1967 GMC- SC & Cam'd 4.8, built 4l80, 3200 stall, posi, 4.10 1967 Chevy LWB- 454 and patina 1971 Blazer - Rusty 1968 Crewcab project |
|
|
|
03-14-2016, 04:23 PM
|
#2 | |
|
Registered User
Join Date: Jan 2016
Location: Wisconsin Rapids WI
Posts: 37
|
Re: 67 GMC Quick Build
Did you machine down the axle hub on these to fit the transport wheels and newer rear disc or did you bore out the disc and the wheel?
Quote:
|
|
|
|
|
|
03-14-2016, 04:26 PM
|
#3 | |
|
C10 Collector
Join Date: Oct 2003
Location: Baton Rouge, LA
Posts: 418
|
Re: 67 GMC Quick Build
Quote:
__________________
///Ryan 1972 Chevy C-10-Bagged, Blown LT1, 700r4, Suicide Doors 1967 GMC- SC & Cam'd 4.8, built 4l80, 3200 stall, posi, 4.10 1967 Chevy LWB- 454 and patina 1971 Blazer - Rusty 1968 Crewcab project |
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
