|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
01-21-2016, 12:39 AM
|
#1 |
|
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Starting my engine build
If your chasing threads with a tap you need to buy a bottoming tap not a starting tap, starting taps have a tapered start, a bottoming tap only has maybe one thread that is tapered, this will clean the threads in blind holes, probably $10 at my local hardware store. Open the link:
https://www.google.com/imgres?imgurl...lxCbUQ9QEIIDAA . . . . .
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
|
|
|
01-21-2016, 01:14 AM
|
#2 |
|
Registered User
Join Date: Nov 2015
Location: Colfax California
Posts: 1,644
|
Re: Starting my engine build
Looks like I got a plug tap
|
|
|
|
|
01-21-2016, 01:57 AM
|
#3 |
|
Registered User
Join Date: Nov 2015
Location: Colfax California
Posts: 1,644
|
Re: Starting my engine build
I was taking a look at the heads that came off, and the number on them is 3991492. They have 2.02's and 1.60's, and a spring stout enough to run that Lunati that has .455 lift. After reading a bit about them, they look to be pretty nice heads. I'm definetly happy with the heads I got to replace them, but a cool find anyway
|
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
