1964 C10 steering bearing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

akqj9 · 02-02-2016, 04:26 PM

My C10 steering wheel grinds when I turn it like the bearing is bad. I also had to unhook my horn because when I turn the wheel full lock it would honk. There is no slop in the wheel, just tight.

How much trouble is it to replace the bearing (or bearings?) and where should I get the parts?

thanks

chevy_mike · 02-02-2016, 04:29 PM

If just the upper bearing that needs replacing, it's easy. Just pull the steering wheel off and you can get to it. If the lower one needs it, you'll need to pull the whole column out and disassemble it completely.

02-02-2016, 04:26 PM	#1
akqj9 Registered User Join Date: Mar 2015 Location: Los Angeles CA Posts: 99	1964 C10 steering bearing My C10 steering wheel grinds when I turn it like the bearing is bad. I also had to unhook my horn because when I turn the wheel full lock it would honk. There is no slop in the wheel, just tight. How much trouble is it to replace the bearing (or bearings?) and where should I get the parts? thanks

02-02-2016, 04:29 PM	#2
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: 1964 C10 steering bearing If just the upper bearing that needs replacing, it's easy. Just pull the steering wheel off and you can get to it. If the lower one needs it, you'll need to pull the whole column out and disassemble it completely. __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.