FS or trade:4x4 frame,misc extra parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bobvilla67** · 02-12-2004, 02:55 PM

I have had this stuff posted before,but I need to move this before the end of the month.I bought another truck from Teeitup and I don't want to have this stuff in the way.

1971 1/2 ton LWB 4x4 rolling chassis w/4" lift kit,(springs in front,blocks in rear) and fleetbed,no title but has vin plate $500
I may end up parting it out,if I no one wants it complete.

1972 Blazer gas tank has a small pin hole and been sitting out for awhile $30

1969 chevy grill (inner and outer) very good cond $150

1970 gmc hood w/emblems $Free must pick up

1967 hood and front fenders(okay for a driver,)has bondo in the fenders and some dents but no rust.$40

Parts I could use:blue headliner w/trim
blazer hatch
cargo lamp
4wd 350 trans

I will trade up or down for stuff,I might be able to deliver on my way to Kansas,or within a few hundred miles.Email for pics,Thanks,Bobby

Chevyguy111786 · 02-12-2004, 11:05 PM

how much for the fleet bed on the rolling chassis?

ltitsnw · 02-13-2004, 01:07 AM

Hi...what kind of condition is the bed in??......what's the condition of the frame, axles, lift kit is it spring or block in the rear, tire/wheels.....any pics......what's the hood like?.....not much to trade for, I have a rust free short I might let go, it's at teeitup's right now.......Thanks Troy

ltitsnw · 02-13-2004, 01:13 AM

Hi...what kind of condition is the bed in??......what's the condition of the frame, axles, lift kit is it spring or block in the rear, tire/wheels.....any pics......what's the hood like?.....not much to trade for, I have a rust free short I might let go, it's at teeitup's right now.......Thanks Troy

krazy_texan · 02-13-2004, 03:29 AM

what is the difference in a trans for a 2wd and a 4wd, did you get that check yet please pm me as soon as you get it so i will know that you got it, thanks
Jake, i will call you saturday about that front clip. and i will get pics of the parts in the morning.

Nightrider · 02-13-2004, 10:24 AM

what comes with the rolling chassis,axles?I'll come by and take a look,where you at?

**bobvilla67** · 02-15-2004, 07:52 PM

ltitsnw: The rolling chassis is the front and rear differentials,engine and auto trans crossmembers.It is not rusted out or have any damage,just surface rust.The bed is not rusted out,but is does have some damage on the pass side,not bad at all.The lift is springs in front and blocks in rear.It just has some tires to roll it around.The hood is fine for a daily driver.

Krazy Texan I am sending you a pm.

chevyguy111786: I would rather sell the bed with the frame,but if someone wanted to buy the frame w/out the bed I would keep it.

Nightrider: I am located near downtown dallas off I-30 and E.Grand.

Thanks,Bobby

PT'S 70 CST · 02-15-2004, 08:49 PM

HOW MUCH WILL SHIPPING BE ON THE DRAGLITES TO 29129

**bobvilla67** · 02-15-2004, 08:52 PM

PT's 70CST :I have a deal working on the wheels right now but you are next in line if it does not work out.thanks,Bobby

**bobvilla67** · 02-23-2004, 03:15 PM

ttt

rambler · 02-23-2004, 05:18 PM

Got any pics of the frame and the bed? when will you be coming to Kansas?

teeitup · 02-23-2004, 07:53 PM

Joe, he is coming this weekend.

67sub · 02-24-2004, 09:48 AM

Are the '67 hood and fenders still available?

rambler · 02-24-2004, 12:35 PM

Quote:

Originally posted by teeitup
Joe, he is coming this weekend.

Dang, that might be too soon.. I havent finished pulling all the parts of the one I got from you... still got to get my 67 on the road to work on my 72.. I know my next project I want to do a 4x4,,,

PT'S 70 CST · 02-24-2004, 03:12 PM

ARE THE WHEELS STILL FOR SALE

Blue_71 · 02-24-2004, 07:20 PM

if you have a automatic, i think i have a set of headers that will work for you... will you sell the 4" lift by itself?

Ruckus · 02-24-2004, 09:43 PM

If it's not too late....do you have any pics of the chassis and bed. I've been toying w/ going 4x4 and I'm not far from Randy's. I'll pm you my email.
Thanks, Eric

teeitup · 02-24-2004, 10:04 PM

Joe and Eric, I haven't heard from Bobby to make sure everything is still a go for this weekend yet. He's a great guy to deal with just like you two, so hopefully one of you can work out something, he can drop it off here for you guys, I can store it for a week or so if that helps. Thanks Randy

**bobvilla67** · 02-25-2004, 11:53 PM

Thanks,Randy
I think I sent everyone pics that asked,if not just remind me.

67sub:I still have the 67 fenders and hood.

Blue_71:I would rather sell the chassis complete but If no one buys it this weekend,I will part it out.

Blue_71 · 02-26-2004, 01:23 AM

just lemme know something, if you decide to part i need front springs, rear blocks and u-bolts, and the drop link, and maybe front driveshaft if its been modified for th elift

do you have automatic or manual?

**bobvilla67** · 02-26-2004, 01:41 AM

I have an automatic,and I will let you know if I part it out.thanks,Bobby

rambler · 02-26-2004, 11:25 AM

Eric go ahead with it,, hope you get it,, I'm not ready to start this project at this time... and wont have the money for 2 weeks

Blue_71 · 02-26-2004, 12:55 PM

ill tell you by this afternoon if i want to get rid of my headers, im making my 2 71s into one truck, and if i dont get a 70 CST/10 im looking at, then the large tube 3/4 length ones will be up for sale.. if i remember right there is one dented tube but they always worked good for me, messed with the clutch linkage though. the full length ones are just better for me

**bobvilla67** · 03-01-2004, 06:52 PM

I guess I am not going to part it out at this time,so I am bringing it to the top again.

pickupman · 03-01-2004, 07:25 PM

Bobby, are you coming back up this way anytime. Shoot me some pictures if you can.
Thanks, Bill

02-12-2004, 02:55 PM	#1
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	FS or trade:LWB 4x4 frame,misc extra parts I have had this stuff posted before,but I need to move this before the end of the month.I bought another truck from Teeitup and I don't want to have this stuff in the way. 1971 1/2 ton LWB 4x4 rolling chassis w/4" lift kit,(springs in front,blocks in rear) and fleetbed,no title but has vin plate $500 I may end up parting it out,if I no one wants it complete. 1972 Blazer gas tank has a small pin hole and been sitting out for awhile $30 1969 chevy grill (inner and outer) very good cond $150 1970 gmc hood w/emblems $Free must pick up 1967 hood and front fenders(okay for a driver,)has bondo in the fenders and some dents but no rust.$40 Parts I could use:blue headliner w/trim blazer hatch cargo lamp 4wd 350 trans I will trade up or down for stuff,I might be able to deliver on my way to Kansas,or within a few hundred miles.Email for pics,Thanks,Bobby __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350 Last edited by bobvilla67; 03-01-2004 at 06:44 PM.

02-13-2004, 01:07 AM	#3
ltitsnw Registered User Join Date: Dec 2003 Location: Central Iowa Posts: 119	Hi...what kind of condition is the bed in??......what's the condition of the frame, axles, lift kit is it spring or block in the rear, tire/wheels.....any pics......what's the hood like?.....not much to trade for, I have a rust free short I might let go, it's at teeitup's right now.......Thanks Troy __________________ 72 2wd Short Super-almost ready to start on it 95 S10 ZR2-not sure why it followed me home 02 3/4 2wd reg cab-work truck, possible 6.0L donor 06 4x crew-kid hauler, snow chaser

02-13-2004, 01:13 AM	#4
ltitsnw Registered User Join Date: Dec 2003 Location: Central Iowa Posts: 119	Hi...what kind of condition is the bed in??......what's the condition of the frame, axles, lift kit is it spring or block in the rear, tire/wheels.....any pics......what's the hood like?.....not much to trade for, I have a rust free short I might let go, it's at teeitup's right now.......Thanks Troy __________________ 72 2wd Short Super-almost ready to start on it 95 S10 ZR2-not sure why it followed me home 02 3/4 2wd reg cab-work truck, possible 6.0L donor 06 4x crew-kid hauler, snow chaser

02-13-2004, 03:29 AM	#5
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	what is the difference in a trans for a 2wd and a 4wd, did you get that check yet please pm me as soon as you get it so i will know that you got it, thanks Jake, i will call you saturday about that front clip. and i will get pics of the parts in the morning. __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

02-13-2004, 10:24 AM	#6
Nightrider Registered User Join Date: Jan 2001 Location: Anywhere, Texas Posts: 253	what comes with the rolling chassis,axles?I'll come by and take a look,where you at? __________________ ] : - 71' burb,5.3,4wd 02' f350.7.3 00' F250-powerstroke 00' Roadstar 84' Eagle model 10 72' GMC 18' camery 12' ZX14R-

02-12-2004, 11:05 PM	#2
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	how much for the fleet bed on the rolling chassis?

02-15-2004, 07:52 PM	#7
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	ltitsnw: The rolling chassis is the front and rear differentials,engine and auto trans crossmembers.It is not rusted out or have any damage,just surface rust.The bed is not rusted out,but is does have some damage on the pass side,not bad at all.The lift is springs in front and blocks in rear.It just has some tires to roll it around.The hood is fine for a daily driver. Krazy Texan I am sending you a pm. chevyguy111786: I would rather sell the bed with the frame,but if someone wanted to buy the frame w/out the bed I would keep it. Nightrider: I am located near downtown dallas off I-30 and E.Grand. Thanks,Bobby __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

02-15-2004, 08:49 PM	#8
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	HOW MUCH WILL SHIPPING BE ON THE DRAGLITES TO 29129 __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

02-15-2004, 08:52 PM	#9
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	weld wheels PT's 70CST :I have a deal working on the wheels right now but you are next in line if it does not work out.thanks,Bobby __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

02-23-2004, 03:15 PM	#10
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	ttt __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

02-23-2004, 05:18 PM	#11
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	Got any pics of the frame and the bed? when will you be coming to Kansas? __________________ No matter where you are..... There you are... Buckaroo Banzi

02-23-2004, 07:53 PM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Joe, he is coming this weekend. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-24-2004, 09:48 AM	#13
67sub Registered User Join Date: Aug 2003 Location: D/FW TX Posts: 430	Are the '67 hood and fenders still available? __________________ 2004 Kawasaki KLR Always looking for a cheap driver

02-24-2004, 03:12 PM	#15
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	ARE THE WHEELS STILL FOR SALE __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

02-24-2004, 09:43 PM	#17
Ruckus Registered User Join Date: Jul 2003 Location: Lawrence, KS Posts: 127	If it's not too late....do you have any pics of the chassis and bed. I've been toying w/ going 4x4 and I'm not far from Randy's. I'll pm you my email. Thanks, Eric __________________ 1971 GMC LWB 350/350--SOLD 1970 Chevy LWB 350/350--SOLD 2000 VW VR6!



Register or Log In To remove these advertisements.

02-24-2004, 10:04 PM	#18
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Joe and Eric, I haven't heard from Bobby to make sure everything is still a go for this weekend yet. He's a great guy to deal with just like you two, so hopefully one of you can work out something, he can drop it off here for you guys, I can store it for a week or so if that helps. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-25-2004, 11:53 PM	#19
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	Thanks,Randy I think I sent everyone pics that asked,if not just remind me. 67sub:I still have the 67 fenders and hood. Blue_71:I would rather sell the chassis complete but If no one buys it this weekend,I will part it out. __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

02-26-2004, 01:41 AM	#21
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	I have an automatic,and I will let you know if I part it out.thanks,Bobby __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

02-26-2004, 11:25 AM	#22
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	Eric go ahead with it,, hope you get it,, I'm not ready to start this project at this time... and wont have the money for 2 weeks __________________ No matter where you are..... There you are... Buckaroo Banzi

03-01-2004, 06:52 PM	#24
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	I guess I am not going to part it out at this time,so I am bringing it to the top again. __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

03-01-2004, 07:25 PM	#25
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Bobby, are you coming back up this way anytime. Shoot me some pictures if you can. Thanks, Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

Register or Log In To remove these advertisements.