47-55.1 Danforth Cross Member Install

[dwcsr]

Originally Posted by Coach529

What did you do for hoses?

I used the Borgeson 925102 Ford 79-97 rack to GM Type II pump and the speedway imperial fittings. -AN fittings are still imperial so the hose ends were ok. You will have to use the brass ferrule from the kit in the pump

[Coach529]

Originally Posted by dwcsr

I used the Borgeson 925102 Ford 79-97 rack to GM Type II pump and the speedway imperial fittings. -AN fittings are still imperial so the hose ends were ok. You will have to use the brass ferrule from the kit in the pump

So I need the hose kit and an adapter that goes from 9/16-18 to 14mm-1.5 for the pressure and 5/8-18 to 16mm-1.5 for the return?

[dwcsr]

Originally Posted by Coach529

So I need the hose kit and an adapter that goes from 9/16-18 to 14mm-1.5 for the pressure and 5/8-18 to 16mm-1.5 for the return?

The hose kit is correct length and angle on the hose ends with the wrong fittings for our rack

I used a the Borgeson hose kit and the rack fittings from speedway 9104047
The hose ends on the hoses are AN and will fit the speedway fittings.

fittings 9/16-18 to -6an and 5/8-18 to-6AN fittings.

You can get a ford pump or add the reducer into a GM pump. I don't now what ford pump you would need