WA 3 hole 67 cluster and parts

[69SCSS]

Hey guys, I am done with my cluster and have my old cluster left over and some other parts. I don't know if anyone would be interested in the cluster as is, but just in case I'll post it here. I got a lot of the actual cluster parts from Tom, so really I just want the stuff to get some use, don't like scrapping stuff if I don't have to.

The speedo is a VDO Vision Series that always has worked perfectly. It's been taken apart to fit the cluster, but I have the ring and the glass for it. Probably best used in this cluster, not really something that will look nice by itself anymore. The tach is a used one that runs a little high and the face is a little faded, but works good. The Fuel gauge is stock and works just like a stock one. The bezel is a '67 bezel I had left over, far from perfect. The front and back tins were modified by Tom to fit the stock tach in the 3-hole cluster, and the speedo area in the back tin has been opened up for the VDO speedo to fit. I put in LED turn signals, and the hi beam light is in the fuel gauge, as is the brake warning.

I have a bunch of leftover gauges, including 78-87 electric oil pressure gauge I was going to swap into the cluster. Also have 2 3 hole lenses, and a stock inner tin I'll throw in with it.

Just don't want this stuff to go to waste. I'll ship this for $100.

[69SCSS]

ttt

[69SCSS]

ttt

[Onelow69chev]

Would you do $60.00 shipped to CleElum Wa?