New lift kit questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chefk85 · 02-22-2016, 11:03 PM

I'm getting ready to buy a 2-2.5" lift kit. Ive looked at many but think ive settled on one http://www.truckspring.com/suspensio...del=K10-Pickup . will this be the one? its a 71 k10 front discs, add a leafs in the rear, power steering w/ stabilizer, 283ci/th350 3.07 gears front and rear, stock hubs. Hope I'm not forgetting anything important. Trying to clear 255/85/R16s and make it a little more off-road worthy and tough looking as the backroads of the Idaho rocky mtns. require. Will be used for 50/50 offroad/onroad, light hauling, regular mud and snow, hunting/fishing and a fun cruiser. Anyone have experience with this lift? anything I should watch for or corrections to be made? Other options cheaper or mo better?

1968vetL-71 · 02-22-2016, 11:05 PM

Thats a good looking rig right there!!!

chefk85 · 02-22-2016, 11:35 PM

Thanks. been sitting stagnant for a year. Chomping at the bit to get going on some resto and upgrades. Love the Impala. Theres something special about that era muscle car. my father had many and sold them all. We are looking for one to build. Something we can do together and something to remember him by(or maybe ill go first! lol). He was a mopar guy primarily. He had a 70 super bee hopped up with irrigation handline for exhaust, 69 challenger black on silver, Studebakers, GTOs. He drives a Tundra now

Something will come along. Nice car.

swamp rat · 02-23-2016, 12:02 AM

I don't have any experience with your lift but i can tell you my 4" with 33" BFG's gave me 12" from the tire to fender clearance on the front, and the same or a bit more on the rear, lots of guys here say a set of 35" will be fine on a 4" lift.

I think it would be real safe to say that i could run a 2" lift with my tires. The tire you posted converts to a 31"X 8.86" which tells me again that you should be fine.

http://www.crawlpedia.com/tire_size_converter.htm
.
.
.
.

CG · 02-23-2016, 12:07 AM

Lots of people run 2.5 inch lift with 33's with no problems.

Nitis · 02-23-2016, 12:35 AM

I'm running 32 11.50 on rally's with no lift. 255 85 is a great size often overlooked tire

You might try replacing all of the shackle and spring bushings rubber/poly whatever they are and that could get you all you need. I used to run that tire on my 85 3/4 ton no problem. It's a tall tire not very wide which helps

Check the 4x4 build section too.

**special-K** · 02-23-2016, 09:38 AM

All kinds of lift, tire fitment, and clearance info in our site's 4x4 forum:

http://67-72chevytrucks.com/vboard/f...splay.php?f=30

02-22-2016, 11:03 PM	#1
chefk85 Registered User Join Date: Jun 2015 Location: Bellevue, Id Posts: 173	New lift kit questions I'm getting ready to buy a 2-2.5" lift kit. Ive looked at many but think ive settled on one http://www.truckspring.com/suspensio...del=K10-Pickup . will this be the one? its a 71 k10 front discs, add a leafs in the rear, power steering w/ stabilizer, 283ci/th350 3.07 gears front and rear, stock hubs. Hope I'm not forgetting anything important. Trying to clear 255/85/R16s and make it a little more off-road worthy and tough looking as the backroads of the Idaho rocky mtns. require. Will be used for 50/50 offroad/onroad, light hauling, regular mud and snow, hunting/fishing and a fun cruiser. Anyone have experience with this lift? anything I should watch for or corrections to be made? Other options cheaper or mo better? Attached Images

02-22-2016, 11:05 PM	#2
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: New lift kit questions Thats a good looking rig right there!!! __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

02-22-2016, 11:35 PM	#3
chefk85 Registered User Join Date: Jun 2015 Location: Bellevue, Id Posts: 173	Re: New lift kit questions Thanks. been sitting stagnant for a year. Chomping at the bit to get going on some resto and upgrades. Love the Impala. Theres something special about that era muscle car. my father had many and sold them all. We are looking for one to build. Something we can do together and something to remember him by(or maybe ill go first! lol). He was a mopar guy primarily. He had a 70 super bee hopped up with irrigation handline for exhaust, 69 challenger black on silver, Studebakers, GTOs. He drives a Tundra now Something will come along. Nice car.

02-23-2016, 12:02 AM	#4
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: New lift kit questions I don't have any experience with your lift but i can tell you my 4" with 33" BFG's gave me 12" from the tire to fender clearance on the front, and the same or a bit more on the rear, lots of guys here say a set of 35" will be fine on a 4" lift. I think it would be real safe to say that i could run a 2" lift with my tires. The tire you posted converts to a 31"X 8.86" which tells me again that you should be fine. http://www.crawlpedia.com/tire_size_converter.htm . . . . __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

02-23-2016, 12:07 AM	#5
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,019	Re: New lift kit questions Lots of people run 2.5 inch lift with 33's with no problems. __________________ … … … … … … … … ... … … … … … … … … … … …

02-23-2016, 12:35 AM	#6
Nitis Registered User Join Date: Apr 2014 Location: NOR-CAL Posts: 1,134	Re: New lift kit questions I'm running 32 11.50 on rally's with no lift. 255 85 is a great size often overlooked tire You might try replacing all of the shackle and spring bushings rubber/poly whatever they are and that could get you all you need. I used to run that tire on my 85 3/4 ton no problem. It's a tall tire not very wide which helps Check the 4x4 build section too.

02-23-2016, 09:38 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: New lift kit questions All kinds of lift, tire fitment, and clearance info in our site's 4x4 forum: http://67-72chevytrucks.com/vboard/f...splay.php?f=30 __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.