Interior after tank removal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**mikey531** · 02-28-2016, 05:30 PM

I would like some ideas on how to finish off my interior after moving the tank to the rear. Or where to look?

Thank

**Grumpy old man** · 02-28-2016, 06:29 PM

New carpet kit from ACC and add the extra panel to cover the back wall . the new carpet can be ordered to cover the floor all the way to the back wall of the cab after removing your tank they also make a rear panel .

Auto Custom Carpets

https://www.accmats.com/

**mikey531** · 02-28-2016, 07:15 PM

Thanks Do you have any pictures?

57larry · 02-28-2016, 09:33 PM

Quote:

Originally Posted by Grumpy old man

New carpet kit from ACC and add the extra panel to cover the back wall . the new carpet can be ordered to cover the floor all the way to the back wall of the cab after removing your tank they also make a rear panel .

Auto Custom Carpets

https://www.accmats.com/

that's the way I did it

Andy4639 · 02-29-2016, 01:37 AM

May I suggest you look over in the truck audio section. Even if you don't plan on a speaker box there are some great idea's in the section for how to do the backside.

http://67-72chevytrucks.com/vboard/f...ysprune=&f=111

02-28-2016, 05:30 PM	#1
mikey531 Senior Member Join Date: Jul 2009 Location: Exeter, NH Posts: 786	Interior after tank removal I would like some ideas on how to finish off my interior after moving the tank to the rear. Or where to look? Thank

02-28-2016, 06:29 PM	#2
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Interior after tank removal New carpet kit from ACC and add the extra panel to cover the back wall . the new carpet can be ordered to cover the floor all the way to the back wall of the cab after removing your tank they also make a rear panel . Auto Custom Carpets https://www.accmats.com/ __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

02-28-2016, 07:15 PM	#3
mikey531 Senior Member Join Date: Jul 2009 Location: Exeter, NH Posts: 786	Re: Interior after tank removal Thanks Do you have any pictures?

02-29-2016, 01:37 AM	#5
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Interior after tank removal May I suggest you look over in the truck audio section. Even if you don't plan on a speaker box there are some great idea's in the section for how to do the backside. http://67-72chevytrucks.com/vboard/f...ysprune=&f=111 __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.