GA Blazer/Bucket Seat Black Belts 70 and 72 w/Shoulder Belts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**w314speed** · 03-06-2016, 06:21 PM

Here are three sets of Black Seat Belts. The first pair are dated 1970 and for Blazer or bucket seat truck. They need to be cleaned, but have no tears in the retractor plastic and chrome in good shape. $125 shipped. The second set are 1972 Black for Blazer or Bucket seat trucks. Thease are the cleanest original belts, I have ever seen. They are show quality and still has some plastic cover residue on the chrome clip portion.$200 shipped SOLD. The third are black shoulder belts that have been re-webbed in appears to be original material. They do not have date tags on them, so I assume you can add whatever tag you need (Not Available- see post from Leddzepp). First, I'll take it in the thread. Payment is Paypal (add 3% fee) or Money Order. Thanks, Dan

**w314speed** · 03-06-2016, 06:25 PM

1972 Black Belts!

**w314speed** · 03-06-2016, 06:27 PM

Shoulder Belts!

**Blue/72** · 03-06-2016, 06:32 PM

How is the chrome on the shoulder belts? Any tears in the plastic or cracks in the buckles? I'm looking for a really clean set. If they are really nice I will take them. Also, what else is needed to make them a full set other than the center belt set? Thanks

**Classic Bowties** · 03-06-2016, 06:33 PM

Your second pictured set (the cleaner one's) would not be correct for a blazer, the blazers used a short stubby retractor on RH/pass side to allow easier pass access into the back seat area, also the female side of the RH blazer belt setup had a thick plastic sheathing over the lower area of the webbing. Nice looking belts though, Mel.

**w314speed** · 03-06-2016, 06:56 PM

Quote:

Originally Posted by Blue/72

How is the chrome on the shoulder belts? Any tears in the plastic or cracks in the buckles? I'm looking for a really clean set. If they are really nice I will take them. Also, what else is needed to make them a full set other than the center belt set? Thanks

The chrome is nice on the shoulder belts. No tears in the plastic and no cracks in the plastic buckles! What else is needed, is the center belt for bench seats and the RH and LH belts with retractors, to complete the set. Thanks, Dan

**w314speed** · 03-06-2016, 07:01 PM

Quote:

Originally Posted by Classic Bowties

Your second pictured set (the cleaner one's) would not be correct for a blazer, the blazers used a short stubby retractor on RH/pass side to allow easier pass access into the back seat area, also the female side of the RH blazer belt setup had a thick plastic sheathing over the lower area of the webbing. Nice looking belts though, Mel.

Thanks, so much for your input. I have not owned a Blazer or parted one out, so I assumed they were the same as our trucks! So, these would be for bucket seat truck. Thanks, Dan

Dirt's72 · 03-06-2016, 07:05 PM

I will get in line on the shoulder belts.

**Blue/72** · 03-06-2016, 07:20 PM

I will pass, thanks

**leddzepp** · 03-06-2016, 07:21 PM

The retainers on the shoulder belts are from a 68-70 Mustang or Cougar.

**w314speed** · 03-06-2016, 07:57 PM

[QUOTE=leddzepp;7512064]The retainers on the shoulder belts are from a 68-70 Mustang or Cougar.[/QU

Thanks for the update on the application. I bought them from another board member some years ago. I'll do some research. Do you have some pics of the REAL DEAL! Thanks, Dan

**w314speed** · 03-06-2016, 08:21 PM

Quote:

Originally Posted by Dirt's72

I will get in line on the shoulder belts.

See Leddzepp post! Sorry. Hope, he can post the real deal, so we can see the real deal! Thanks, Dan

**leddzepp** · 03-06-2016, 08:37 PM

Here is what the boots should look like

Dirt's72 · 03-06-2016, 09:10 PM

I'm going to pass for now. Thanks ledzepp for the pics and description. They sure look nice. I just read also how they are locked all the time so it would seem they would restrict from leaning forward to change lanes.

**3sonsdad** · 03-07-2016, 12:03 AM

I'll take the 72 black bucket seat show quality belts. Will send a pm regarding shipping as I live in Canada.

**w314speed** · 03-07-2016, 08:14 AM

Quote:

Originally Posted by 3sonsdad

I'll take the 72 black bucket seat show quality belts. Will send a pm regarding shipping as I live in Canada.

I'll get you a shipping quote. Thanks, Dan

**w314speed** · 03-07-2016, 10:24 AM

Quote:

Originally Posted by leddzepp

Here is what the boots should look like

Thanks for posting the pics! I am looking for a set of 72 Green, so I don't want to get the wrong ones. Thanks, Dan

**FirstOwner69** · 03-07-2016, 03:07 PM

Quote:

Originally Posted by leddzepp

Here is what the boots should look like

There's probably a better place to discuss this... but here goes.

I've read every thread I can find regarding the correct shoulder belt boots including several from 2011 that you and 70LonghornCST made significant contributions to. The ones you show above are the most commonly acknowledged as correct. However, there is another boot that is similar, but it has the dimple in a horizontal orientation as shown in 70Longhorn's post #7 in this thread http://67-72chevytrucks.com/vboard/s...shoulder+belts and the picture below of belts I found in a '71 or '72 Blazer that are dated sometime in the last 6 months of 1971. Unfortunately, the rear seat shoulder belts I found were cut off at the boots as shown in the center of my picture. Do you know if this boot with the horizontal dimple has been acknowledged as also correct for at least '71s and/or '72s?

Thanks,
Jim

402GMC · 03-07-2016, 07:17 PM

I'm interested in both the shoulder belts and the other seat belts. How much shipped to 57718

**leddzepp** · 03-08-2016, 01:13 AM

Quote:

Originally Posted by FirstOwner69

There's probably a better place to discuss this... but here goes.

I've read every thread I can find regarding the correct shoulder belt boots including several from 2011 that you and 70LonghornCST made significant contributions to. The ones you show above are the most commonly acknowledged as correct. However, there is another boot that is similar, but it has the dimple in a horizontal orientation as shown in 70Longhorn's post #7 in this thread http://67-72chevytrucks.com/vboard/s...shoulder+belts and the picture below of belts I found in a '71 or '72 Blazer that are dated sometime in the last 6 months of 1971. Unfortunately, the rear seat shoulder belts I found were cut off at the boots as shown in the center of my picture. Do you know if this boot with the horizontal dimple has been acknowledged as also correct for at least '71s and/or '72s?

Thanks,
Jim

Jim- They were a factory RPO option (A85) from 67-70 and have the vertical dimple. All NOS belts I have ever seen for sale (in a box) were from 71-72 and have the horizontal dimple. I suspect that is because they were a dealer installed part in 71-72 and no longer an RPO option.

**FirstOwner69** · 03-08-2016, 02:00 AM

Quote:

Originally Posted by leddzepp

Jim- They were a factory RPO option (A85) from 67-70 and have the vertical dimple. All NOS belts I have ever seen for sale (in a box) were from 71-72 and have the horizontal dimple. I suspect that is because they were a dealer installed part in 71-72 and no longer an RPO option.

Great info! Thanks again.
Jim

**w314speed** · 03-08-2016, 06:12 AM

Quote:

Originally Posted by 402GMC

I'm interested in both the shoulder belts and the other seat belts. How much shipped to 57718

PM sent.

03-06-2016, 06:21 PM	#1
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,315	Blazer/Bucket Seat Black Belts 70 and 72 w/Shoulder Belts Here are three sets of Black Seat Belts. The first pair are dated 1970 and for Blazer or bucket seat truck. They need to be cleaned, but have no tears in the retractor plastic and chrome in good shape. $125 shipped. The second set are 1972 Black for Blazer or Bucket seat trucks. Thease are the cleanest original belts, I have ever seen. They are show quality and still has some plastic cover residue on the chrome clip portion.$200 shipped SOLD. The third are black shoulder belts that have been re-webbed in appears to be original material. They do not have date tags on them, so I assume you can add whatever tag you need (Not Available- see post from Leddzepp). First, I'll take it in the thread. Payment is Paypal (add 3% fee) or Money Order. Thanks, Dan Attached Images Last edited by w314speed; 03-07-2016 at 10:13 AM.

03-06-2016, 06:25 PM	#2
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,315	Re: Blazer/Bucket Seat Black Belts 70 and 72 w/Shoulder Belts 1972 Black Belts! Attached Images

03-06-2016, 06:27 PM	#3
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,315	Re: Blazer/Bucket Seat Black Belts 70 and 72 w/Shoulder Belts Shoulder Belts! Attached Images

03-06-2016, 06:32 PM	#4
Blue/72 Senior Member Join Date: Aug 2014 Location: Sandy, Oregon Posts: 2,378	Re: Blazer/Bucket Seat Black Belts 70 and 72 w/Shoulder Belts How is the chrome on the shoulder belts? Any tears in the plastic or cracks in the buckles? I'm looking for a really clean set. If they are really nice I will take them. Also, what else is needed to make them a full set other than the center belt set? Thanks __________________ My dad always says that HEI distributers are pointless... •1972 Custom/10 Deluxe. My first truck and I've had it since I was 7. Tilt, tach, AM/FM, 350, deep dish rally's, original paint and an increasing amount of NOS jewelry. It's always taking my money.. •1967 c10 with tach, dropped 3/5 on deep dish rally's •1972 Cheyenne Super. Sold

03-06-2016, 06:33 PM	#5
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,732	Re: Blazer/Bucket Seat Black Belts 70 and 72 w/Shoulder Belts Your second pictured set (the cleaner one's) would not be correct for a blazer, the blazers used a short stubby retractor on RH/pass side to allow easier pass access into the back seat area, also the female side of the RH blazer belt setup had a thick plastic sheathing over the lower area of the webbing. Nice looking belts though, Mel.

03-06-2016, 07:05 PM	#8
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,106	Re: Blazer/Bucket Seat Black Belts 70 and 72 w/Shoulder Belts I will get in line on the shoulder belts.

03-06-2016, 07:20 PM	#9
Blue/72 Senior Member Join Date: Aug 2014 Location: Sandy, Oregon Posts: 2,378	Re: Blazer/Bucket Seat Black Belts 70 and 72 w/Shoulder Belts I will pass, thanks __________________ My dad always says that HEI distributers are pointless... •1972 Custom/10 Deluxe. My first truck and I've had it since I was 7. Tilt, tach, AM/FM, 350, deep dish rally's, original paint and an increasing amount of NOS jewelry. It's always taking my money.. •1967 c10 with tach, dropped 3/5 on deep dish rally's •1972 Cheyenne Super. Sold

03-06-2016, 07:21 PM	#10
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: Blazer/Bucket Seat Black Belts 70 and 72 w/Shoulder Belts The retainers on the shoulder belts are from a 68-70 Mustang or Cougar. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

03-06-2016, 07:57 PM	#11
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,315	Re: Blazer/Bucket Seat Black Belts 70 and 72 w/Shoulder Belts [QUOTE=leddzepp;7512064]The retainers on the shoulder belts are from a 68-70 Mustang or Cougar.[/QU Thanks for the update on the application. I bought them from another board member some years ago. I'll do some research. Do you have some pics of the REAL DEAL! Thanks, Dan

03-06-2016, 08:37 PM	#13
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: Blazer/Bucket Seat Black Belts 70 and 72 w/Shoulder Belts Here is what the boots should look like Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

03-06-2016, 09:10 PM	#14
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,106	Re: Blazer/Bucket Seat Black Belts 70 and 72 w/Shoulder Belts I'm going to pass for now. Thanks ledzepp for the pics and description. They sure look nice. I just read also how they are locked all the time so it would seem they would restrict from leaning forward to change lanes.

03-07-2016, 12:03 AM	#15
3sonsdad Senior Member Join Date: Jan 2012 Location: Spruce Grove, Alberta Posts: 240	Re: Blazer/Bucket Seat Black Belts 70 and 72 w/Shoulder Belts I'll take the 72 black bucket seat show quality belts. Will send a pm regarding shipping as I live in Canada.

03-07-2016, 07:17 PM	#19
402GMC Registered User Join Date: May 2008 Location: RAPID CITY, SOUTH DAKOTA Posts: 411	Re: Blazer/Bucket Seat Black Belts 70 and 72 w/Shoulder Belts I'm interested in both the shoulder belts and the other seat belts. How much shipped to 57718



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.