Fuel sending unit question - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

slimneverdies · 03-08-2016, 02:06 PM

Quote:

Originally Posted by CSHADES

When I rewire any vehicle I always treat the grounds like the car is made of fiberglass and run dedicated grounds from each device to a ground bar that I install either under hood or in the cab. Otherwise you are going to have to grind some of the powdercoat off, which takes away the advantage of powdercoat.

Can you ground off stainless steel. I can put little stainless tab/bars to bare metal in a few places so I can ground.

CSHADES · 03-08-2016, 06:38 PM

Yes you can do that as long as everything is clean and shiny. Use some grease over the top of the connections when you are done. At least you don't have salt to worry about.

slimneverdies · 03-08-2016, 08:14 PM

Cool. I get the idea now. Thanks

03-08-2016, 06:38 PM	#27
CSHADES Registered User Join Date: Nov 2015 Location: portage wi Posts: 504	Re: Fuel sending unit question Yes you can do that as long as everything is clean and shiny. Use some grease over the top of the connections when you are done. At least you don't have salt to worry about.

03-08-2016, 08:14 PM	#28
slimneverdies Registered User Join Date: Apr 2006 Location: Miami now in Vegas Posts: 828	Re: Fuel sending unit question Cool. I get the idea now. Thanks __________________ Long live SLIM ------------------ At least try to buy American



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.