KY WTB-1972 ¾ 4wd jack, handle, lug wrench

[blackhawkip]

Hey guys, I am looking for a correct jack for my ¾ ton 4wd. I've seen a few ½ ton versions but no ¾ ton. Let me know what you have and shipping to 40121.

Thanks

[PICKMUP]

Originally Posted by blackhawkip

Hey guys, I am looking for a correct jack for my ¾ ton 4wd. I've seen a few ½ ton versions but no ¾ ton. Let me know what you have and shipping to 40121.

Thanks

Got a picture? What's different?

[blackhawkip]

The picture of the jack in the truck is my 1972 original jack. The other picture is from a board member who posted pictures awhile ago. Slight differences in the support brace and possibly the size/diameter. I've never held both in my hands at the same time to say diameter, height, etc. To me, the ¾ ton looks wider at the base, but that could just be the picture.
IF someone has one they know came out of a ¾ ton or matches my original jack; I am interested in buying it.

Hope this helps.

[John H.]

I have one out of a 72. Jack, handle, lug wrench and the remains of the bag. I took it out of the 3/4 ton myself. Not sure what the differences are. I will get pictures later tonight.

[blackhawkip]

That would be great! Thanks

[John H.]

The end of the lug wrench will have a little pitting, but could be worked out with a few coats of primer. Goes in and out.

$90 shipped. I figure $22 to ship because of the length/weight.

[RogerKoop]

According to GM the jack and handle are the same. The lug wrench is different.

I have them for sale.

See my post http://67-72chevytrucks.com/vboard/s...d.php?t=569928

Thanks

[blackhawkip]

Roger, did you end up finding a ¾ ton lug wrench?

[RogerKoop]

Originally Posted by blackhawkip

Roger, did you end up finding a ¾ ton lug wrench?

Still looking. For some reason I've had a hard time finding one.

[RogerKoop]

Originally Posted by blackhawkip

Roger, did you end up finding a ¾ ton lug wrench?

I found a 3/4 lug wrench if you are still interested.

[John H.]

Resurrecting an old thread.

I recently pulled this jack assm and tool bag from a June built 1972 3/4 ton GMC 2WD.

I am thinking there may have been a changeover at some point as the Jack out of the 72 looks like the one in the truck pictures.

[Dirt's72]

Originally Posted by John H.

Resurrecting an old thread.

I recently pulled this jack assm and tool bag from a June built 1972 3/4 ton GMC 2WD.

I am thinking there may have been a changeover at some point as the Jack out of the 72 looks like the one in the truck pictures.

Attachment 1507034

Attachment 1507035

Attachment 1507036

Attachment 1507037

Attachment 1507038

Is this something you would sell?

[John H.]

I want to keep it for now. Just trying to understand when the changeover happened.

[Dirt's72]

Ok let me know if you decide to sell. I've never seen the difference before.
I used my 46 year old 1/2 ton jack to lift my 72 RV the other day cuz my harbor freight hydraulic floor jack couldn't do it. The 1/2 ton jack did well.

[67kid]

I would be interested in jack setup as well

[John H.]

Originally Posted by 67kid

I would be interested in jack setup as well

Scott, I have a couple other jacks and handles that would be correct for 1/2 ton and 3/4 ton. No bags though. The larger jack I believe was a late changeover for 3/4 tons.

[John H.]

Originally Posted by 67kid

I would be interested in jack setup as well

Scott, I have a couple other jacks and handles that would be correct for 1/2 ton and 3/4 ton. No bags though. The larger jack I believe was a late changeover for 3/4 tons.