|
02-13-2016, 09:52 PM
|
#1 |
|
Master Hater
Join Date: Apr 2006
Location: Temple,Tx.
Posts: 402
|
Quick Clean up 85 c20
Picked this up today for a steal, It was so clean I couldn't pass it up, its a C20 with the C6P Heavy duty Chassis package and is a Silverado Package. 350 th400 interestingly enough this can hold a bigger camper than the dually but just 100 lbs less weight . I went and looked at it and it wouldn't hardly run, y pipe is broken and held together with a tin can and a worm clamp , I managed to drive it home 25 miles at 65-70 mph got it home and tinkered with it to find out its got a big vac leak under the carb adapter , the dist was super loose, it is in sad shape. The ad said it had a rebuilt engine with 1000 miles ,, needless to say when i asked the guy about it he couldn't seem to locate the paperwork ..lol I could see by the 2 inches thick of grease on the block it wasn't rebuilt but did seem to run OK on the highway.
                 
__________________
1997 C1500 ECSB 4.3/NV3500 8.5 3.42 "This evening, all of you bleeding hearts... why don't just go ahead and hug yourself for the next 20 minutes or so, because there's a really good chance you're gonna be offended".- Captain Owen Honors |
|
|
|
02-13-2016, 09:55 PM
|
#2 |
|
Master Hater
Join Date: Apr 2006
Location: Temple,Tx.
Posts: 402
|
Re: Quick Clean up 85 c20
The Brake controller is so old its plumbed directly to the Master Cly. LOL
__________________
1997 C1500 ECSB 4.3/NV3500 8.5 3.42 "This evening, all of you bleeding hearts... why don't just go ahead and hug yourself for the next 20 minutes or so, because there's a really good chance you're gonna be offended".- Captain Owen Honors |
|
|
|
|
02-14-2016, 05:57 PM
|
#3 |
|
Master Hater
Join Date: Apr 2006
Location: Temple,Tx.
Posts: 402
|
Re: Quick Clean up 85 c20
Little cleaning up..
 
__________________
1997 C1500 ECSB 4.3/NV3500 8.5 3.42 "This evening, all of you bleeding hearts... why don't just go ahead and hug yourself for the next 20 minutes or so, because there's a really good chance you're gonna be offended".- Captain Owen Honors |
|
|
|
|
02-15-2016, 02:43 AM
|
#4 |
|
Registered User
Join Date: Dec 2009
Location: Fairbanks, AK
Posts: 1,830
|
Re: Quick Clean up 85 c20
Cool rig. What's the plan?
__________________
-Marcus 1991 V3500 L29 454 4L80E NP205 D60/14 Bolt 4.56's 1984 K30 292 TH400 NP205 D60/14 Bolt 4.56's flat bed 7'6" Meyer Plow 2022 Silverado 3500 L8T Project Daily Driver Project Heavy Hauler Project Plow Truck |
|
|
|
|
02-15-2016, 09:26 AM
|
#5 |
|
Master Hater
Join Date: Apr 2006
Location: Temple,Tx.
Posts: 402
|
Re: Quick Clean up 85 c20
Not sure yet I think I'm just going to clean it up, redo the interior and drop in a vortec long block with a zz4 cam and rebuild the TH400 or find a 4l80E
__________________
1997 C1500 ECSB 4.3/NV3500 8.5 3.42 "This evening, all of you bleeding hearts... why don't just go ahead and hug yourself for the next 20 minutes or so, because there's a really good chance you're gonna be offended".- Captain Owen Honors |
|
|
|
|
02-15-2016, 10:17 PM
|
#6 |
|
Master Hater
Join Date: Apr 2006
Location: Temple,Tx.
Posts: 402
|
Re: Quick Clean up 85 c20
OK got the exhaust redone today , The Original was broken right after the Y on the Y pipe, They had it wrapped up with muffler putty and tin flashing and worm clamps..lol
I just had em replace it from there back with a flowmaster knockoff Xcelerator Muffler  I found a used bolt on tip out in the scrap pile.. so I asked what he wanted for it and He gave it to me for free.  Also pushed out some of the damaged rear lower quarter. 
__________________
1997 C1500 ECSB 4.3/NV3500 8.5 3.42 "This evening, all of you bleeding hearts... why don't just go ahead and hug yourself for the next 20 minutes or so, because there's a really good chance you're gonna be offended".- Captain Owen Honors |
|
|
|
|
02-17-2016, 02:39 PM
|
#7 |
|
Master Hater
Join Date: Apr 2006
Location: Temple,Tx.
Posts: 402
|
Re: Quick Clean up 85 c20
Took the seat and carpet out yesterday, it was so nasty I couldn't stand riding in it until I get it redone..
     Gotta love texas trucks..  Heater core had been leaking for sometime I guess,   just sprayed down the carpet to get most of the funk out till I can clean the floor off and coat it and add some dynomat and install new padding and carpet and different seats. I go to school full time so I need to drive it 4 days a week.   damn sure smells better .
__________________
1997 C1500 ECSB 4.3/NV3500 8.5 3.42 "This evening, all of you bleeding hearts... why don't just go ahead and hug yourself for the next 20 minutes or so, because there's a really good chance you're gonna be offended".- Captain Owen Honors |
|
|
|
|
02-23-2016, 10:12 AM
|
#8 |
|
Registered User
Join Date: Oct 2015
Location: PNW
Posts: 3,619
|
Re: Quick Clean up 85 c20
Nice clean truck!
|
|
|
|
|
03-06-2016, 09:34 PM
|
#9 |
|
Master Hater
Join Date: Apr 2006
Location: Temple,Tx.
Posts: 402
|
Re: Quick Clean up 85 c20
Picked up a Pressure washer from Tractor supply and went to town on the bottom , Man this thing is clean, but the 30 year old grease was tough to crack, had to use te 0 Degree tip to blast it loose , and I picked up a 90 LO5 from a g20 van fan to flywheel, so thats going in next week and this mix matched pile of crap 350 is coming out.
__________________
1997 C1500 ECSB 4.3/NV3500 8.5 3.42 "This evening, all of you bleeding hearts... why don't just go ahead and hug yourself for the next 20 minutes or so, because there's a really good chance you're gonna be offended".- Captain Owen Honors |
|
|
|
|
03-07-2016, 12:50 AM
|
#10 |
|
Registered User
Join Date: Dec 2009
Location: Fairbanks, AK
Posts: 1,830
|
Re: Quick Clean up 85 c20
Right on. LO5 have a mechanical fuel pump? Come with a serpentine setup?
__________________
-Marcus 1991 V3500 L29 454 4L80E NP205 D60/14 Bolt 4.56's 1984 K30 292 TH400 NP205 D60/14 Bolt 4.56's flat bed 7'6" Meyer Plow 2022 Silverado 3500 L8T Project Daily Driver Project Heavy Hauler Project Plow Truck |
|
|
|
|
03-07-2016, 08:56 AM
|
#11 |
|
Master Hater
Join Date: Apr 2006
Location: Temple,Tx.
Posts: 402
|
Re: Quick Clean up 85 c20
From Fan to Flywheel.
__________________
1997 C1500 ECSB 4.3/NV3500 8.5 3.42 "This evening, all of you bleeding hearts... why don't just go ahead and hug yourself for the next 20 minutes or so, because there's a really good chance you're gonna be offended".- Captain Owen Honors |
|
|
|
|
03-08-2016, 12:59 AM
|
#12 |
|
Member of the longbed union.
Join Date: Feb 2009
Location: Killeen, Tx
Posts: 2,158
|
Re: Quick Clean up 85 c20
Truck looks to be in pretty good shape. Do you know of any other local yards that have c10s besides wrench apart in Belton?
__________________
Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759 |
|
|
|
|
03-08-2016, 04:48 PM
|
#13 |
|
I know the pieces fit
Join Date: Nov 2007
Location: MONTGOMERY, AL
Posts: 5,523
|
Re: Quick Clean up 85 c20
Sweet. There was a nice truck under the crud. Are you planning on dog dish caps or different wheels?
|
|
|
|
|
03-09-2016, 05:48 PM
|
#14 |
|
Master Hater
Join Date: Apr 2006
Location: Temple,Tx.
Posts: 402
|
Re: Quick Clean up 85 c20
Different wheels . Ruff, I,ve only been in the area for little over a year and have yet to visit any junkyards, I know there is a yard a bit down 95 pass little river.
__________________
1997 C1500 ECSB 4.3/NV3500 8.5 3.42 "This evening, all of you bleeding hearts... why don't just go ahead and hug yourself for the next 20 minutes or so, because there's a really good chance you're gonna be offended".- Captain Owen Honors |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
