6 bolt wheels on 72 2 whl Dr - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Towbiz · 03-29-2016, 08:47 PM

looking at purchasing a 72 2 whl Dr SWB , all numbers match but it has 4 wheel drums & 6 bolt wheels . To the best of my knowledge this went away in 70? It also has leaf rear suspension which must be rare but it's listed on options . Anyone know what year leafs were available in this model ? Maybe cab was swapped onto earlier frame but what are the chances that would have leaf springs too ?

**'68OrangeSunshine** · 03-29-2016, 09:27 PM

More likely it was a 4x4 before they gelded it.

57taskforce · 03-29-2016, 09:28 PM

Does the cab vin match the frame vin?

SS Tim · 03-29-2016, 09:51 PM

Define "all numbers match".

71meangreenc10 · 03-29-2016, 10:52 PM

You need to check the both frame vins against the title and cab. I had a guy try to sell me a 72 and he swore it was original. Once I started showing him how it was not, then the real story came out. I have "never" seen a 72 with 4 wheel drums from the factory. Never met anyone who reverse engineered a disk system to drums because they loved drums...I could be wrong, but something doesn't sound right. I would be very cautious about buying that truck.

You could get leafs or coils on both Chevy's and GMC's. Most Chevy's came with coils as most GMC's came with leafs. I did have a GMC Burb with coils and it was listed on the SPID.

70 was the last year for 6 bolt wheels on 2wd half ton trucks. If anyone knows anything different, please educate us.....

Smitty

Towbiz · 03-29-2016, 10:53 PM

Vin decodes to 2 wheel Dr SWB & it has low hump trans cover . It's quite a ways away so have not had opportunity to check # on frame .

Towbiz · 03-29-2016, 10:58 PM

Vin decodes to 2 wheel Dr SWB & it has low hump trans cover . It's quite a ways away so have not had opportunity to check # on frame .

Towbiz · 03-29-2016, 11:04 PM

If I recall on my 72 blazer 2 wheel partial vin # is stamped in frame near steering box ?

71meangreenc10 · 03-29-2016, 11:11 PM

The VIN on the frame only has half of the numbers stamped in it if you have never seen it. The first few digits are not stamped, but most of the middle to the end of the VIN is there. You should be able to match it up if it is legit.

Smitty

71meangreenc10 · 03-29-2016, 11:13 PM

Quote:

Originally Posted by Towbiz

If I recall on my 72 blazer 2 wheel partial vin # is stamped in frame near steering box ?

That is correct, the second VIN is on top of the driver side rail near the back of the cab. Could be closer to the seat location.

Smitty

Towbiz · 03-30-2016, 02:44 PM

Verified that serial # on frame matches so either this is one oddball truck or someone actually converted it from 5 stud disc to 6 stud drum ! Who would do that ??

geezer#99 · 03-30-2016, 02:50 PM

You should give us a pic or a link to it.
Might be something obvious to see.

SS Tim · 03-30-2016, 03:04 PM

The frame VIN will be the last eight digits, year, plant and six for sequence.

Is this a Chevy or GMC? Oshawa (1) assembly or someplace else. Is the SPID optioned for overseas export?

**lolife99** · 03-30-2016, 03:06 PM

For some reason I read this as a 2wd blazer.
My mistake.
Please post pics when you get a chance,...

Towbiz · 03-30-2016, 04:23 PM

Chevy , built in Fremont & spid says " Calif vehicle reg." The spid / door tag & frame #,s match . To the best of my knowledge all blazer 2 wdr were coil spring & also changed in 71 to 5 stud / disc . I had a 72 2 wdr. that I did body off resto on .

57taskforce · 03-30-2016, 06:31 PM

I'm not up on 2wd parts interchange because I'm a 4x4 guy. Is it possible somebody with a pre 71 1/2 ton robbed the coveted 5 lug parts from this truck, then replaced them with the 6 lug parts from an older truck?

hugger6933 · 03-30-2016, 06:43 PM

You know years ago these trucks were bought and sold in all shapes and states of disrepair. Most common being the motor and trans were missing, but someone could have robbed the 5 lug stuff off of it or possibly had two trucks and built his favorite and put the leftover parts on one to sell. I'm sure I'm not the only one that has had leftover stuff find its way onto a truck that ended up being a bargin for someone cause it was mostly leftover parts but still made a pretty decent truck. It is just things like 4 wheel drums could and quite possibly did end up on trucks made after 70 using this method

Towbiz · 03-30-2016, 07:46 PM

Yes guys that about what I summed it up to as well , I didn't think the frame # was going to be a match at 1st . Thought someone swapped cab onto a pre 71 frame but that's not the case . This is a great site , tons of info .

03-29-2016, 08:47 PM	#1
Towbiz Registered User Join Date: Mar 2016 Location: Chilliwack British Columbia Posts: 40	6 bolt wheels on 72 2 whl Dr looking at purchasing a 72 2 whl Dr SWB , all numbers match but it has 4 wheel drums & 6 bolt wheels . To the best of my knowledge this went away in 70? It also has leaf rear suspension which must be rare but it's listed on options . Anyone know what year leafs were available in this model ? Maybe cab was swapped onto earlier frame but what are the chances that would have leaf springs too ?

03-29-2016, 09:27 PM	#2
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,504	Re: 6 bolt wheels on 72 2 whl Dr More likely it was a 4x4 before they gelded it. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

03-29-2016, 09:28 PM	#3
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,487	Re: 6 bolt wheels on 72 2 whl Dr Does the cab vin match the frame vin? __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

03-29-2016, 09:51 PM	#4
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: 6 bolt wheels on 72 2 whl Dr Define "all numbers match". __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

03-29-2016, 10:52 PM	#5
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Re: 6 bolt wheels on 72 2 whl Dr You need to check the both frame vins against the title and cab. I had a guy try to sell me a 72 and he swore it was original. Once I started showing him how it was not, then the real story came out. I have "never" seen a 72 with 4 wheel drums from the factory. Never met anyone who reverse engineered a disk system to drums because they loved drums...I could be wrong, but something doesn't sound right. I would be very cautious about buying that truck. You could get leafs or coils on both Chevy's and GMC's. Most Chevy's came with coils as most GMC's came with leafs. I did have a GMC Burb with coils and it was listed on the SPID. 70 was the last year for 6 bolt wheels on 2wd half ton trucks. If anyone knows anything different, please educate us..... Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

03-29-2016, 10:53 PM	#6
Towbiz Registered User Join Date: Mar 2016 Location: Chilliwack British Columbia Posts: 40	Re: 6 bolt wheels on 72 2 whl Dr Vin decodes to 2 wheel Dr SWB & it has low hump trans cover . It's quite a ways away so have not had opportunity to check # on frame .

03-29-2016, 10:58 PM	#7
Towbiz Registered User Join Date: Mar 2016 Location: Chilliwack British Columbia Posts: 40	Re: 6 bolt wheels on 72 2 whl Dr Vin decodes to 2 wheel Dr SWB & it has low hump trans cover . It's quite a ways away so have not had opportunity to check # on frame .

03-29-2016, 11:04 PM	#8
Towbiz Registered User Join Date: Mar 2016 Location: Chilliwack British Columbia Posts: 40	Re: 6 bolt wheels on 72 2 whl Dr If I recall on my 72 blazer 2 wheel partial vin # is stamped in frame near steering box ?

03-29-2016, 11:11 PM	#9
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Re: 6 bolt wheels on 72 2 whl Dr The VIN on the frame only has half of the numbers stamped in it if you have never seen it. The first few digits are not stamped, but most of the middle to the end of the VIN is there. You should be able to match it up if it is legit. Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

03-30-2016, 02:44 PM	#11
Towbiz Registered User Join Date: Mar 2016 Location: Chilliwack British Columbia Posts: 40	Re: 6 bolt wheels on 72 2 whl Dr Verified that serial # on frame matches so either this is one oddball truck or someone actually converted it from 5 stud disc to 6 stud drum ! Who would do that ??

03-30-2016, 02:50 PM	#12
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,731	Re: 6 bolt wheels on 72 2 whl Dr You should give us a pic or a link to it. Might be something obvious to see.

03-30-2016, 03:04 PM	#13
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: 6 bolt wheels on 72 2 whl Dr The frame VIN will be the last eight digits, year, plant and six for sequence. Is this a Chevy or GMC? Oshawa (1) assembly or someplace else. Is the SPID optioned for overseas export? __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

03-30-2016, 03:06 PM	#14
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: 6 bolt wheels on 72 2 whl Dr For some reason I read this as a 2wd blazer. My mistake. Please post pics when you get a chance,... __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

03-30-2016, 04:23 PM	#15
Towbiz Registered User Join Date: Mar 2016 Location: Chilliwack British Columbia Posts: 40	Re: 6 bolt wheels on 72 2 whl Dr Chevy , built in Fremont & spid says " Calif vehicle reg." The spid / door tag & frame #,s match . To the best of my knowledge all blazer 2 wdr were coil spring & also changed in 71 to 5 stud / disc . I had a 72 2 wdr. that I did body off resto on .

03-30-2016, 06:31 PM	#16
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,487	Re: 6 bolt wheels on 72 2 whl Dr I'm not up on 2wd parts interchange because I'm a 4x4 guy. Is it possible somebody with a pre 71 1/2 ton robbed the coveted 5 lug parts from this truck, then replaced them with the 6 lug parts from an older truck? __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s



Register or Log In To remove these advertisements.

03-30-2016, 06:43 PM	#17
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,280	Re: 6 bolt wheels on 72 2 whl Dr You know years ago these trucks were bought and sold in all shapes and states of disrepair. Most common being the motor and trans were missing, but someone could have robbed the 5 lug stuff off of it or possibly had two trucks and built his favorite and put the leftover parts on one to sell. I'm sure I'm not the only one that has had leftover stuff find its way onto a truck that ended up being a bargin for someone cause it was mostly leftover parts but still made a pretty decent truck. It is just things like 4 wheel drums could and quite possibly did end up on trucks made after 70 using this method

03-30-2016, 07:46 PM	#18
Towbiz Registered User Join Date: Mar 2016 Location: Chilliwack British Columbia Posts: 40	Re: 6 bolt wheels on 72 2 whl Dr Yes guys that about what I summed it up to as well , I didn't think the frame # was going to be a match at 1st . Thought someone swapped cab onto a pre 71 frame but that's not the case . This is a great site , tons of info .

Register or Log In To remove these advertisements.