MrTurner1's project sound clip - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mrturner1 · 03-30-2016, 03:55 PM

Hope the link works. This was an awesome experience for a first timer, and a lot of you guys helped a great deal. Thanks guys for all the help. It's far from done but it's finally tuned and dialed in under the hood. I'll get some more videos soon, we literally just got wifi at the new place so I wanted to get this up for listening enjoyment

Comp 280H Magnum cam and Flowmasters, hard to beat that sound

http://https://youtu.be/7SK0zVSEoUc

geezer#99 · 03-30-2016, 04:13 PM

Try again!!
No worky!!

davepl · 03-30-2016, 04:14 PM

Sounds cool! Here's a corrected link for you:

http://youtu.be/7SK0zVSEoUc

Mrturner1 · 03-30-2016, 04:16 PM

Quote:

Originally Posted by davepl

Sounds cool! Here's a corrected link for you:

http://youtu.be/7SK0zVSEoUc

Awesome thanks Dave!

Mrturner1 · 03-30-2016, 04:18 PM

Don't mind the teradactyl poop on the windshield lol and the vibrating bed

dazza · 03-30-2016, 05:57 PM

oh, it was the bed, I thought it was the license plate... at least you know what to tighten down before you put the 12" woofers in!

it sounds great, I especially like that deep sub-bass as you enter the cab.

Mrturner1 · 03-30-2016, 09:09 PM

Quote:

Originally Posted by dazza

oh, it was the bed, I thought it was the license plate... at least you know what to tighten down before you put the 12" woofers in!

it sounds great, I especially like that deep sub-bass as you enter the cab.

At a certain rpm, like 850 or so, it vibrates EVERYTHING lol might actually get tailpipes soon and see if that helps a little

Average Joe · 03-31-2016, 07:58 PM

Sounds great! Good job!

dazza · 03-31-2016, 08:15 PM

I have bluetooth setup in my truck to play from my phone or the computer here in my garage so your clip worked out well. My nephews were here and keep asking when I'm going to start my truck up, so finally I said, you want to know what it will sound like?? hehe so I blasted your clip through my sound system!

My poor nephew on the front seat didn't know what hit him!! Thanks!

Mrturner1 · 03-31-2016, 09:43 PM

Quote:

Originally Posted by dazza

I have bluetooth setup in my truck to play from my phone or the computer here in my garage so your clip worked out well. My nephews were here and keep asking when I'm going to start my truck up, so finally I said, you want to know what it will sound like?? hehe so I blasted your clip through my sound system!

My poor nephew on the front seat didn't know what hit him!! Thanks!

Nice! That's awesome

Boyd67 · 03-31-2016, 11:38 PM

Mrturner, did you just screw tach mount to a pillar? I like where it is sitting. Truck sounds damn good too.

Redline novdog · 04-01-2016, 06:02 AM

Who needs tunes when that engine sounds like that!!! Sounds great!!! Good job working through all your problems. It was well worth it.
Not to hijack,but in one of your other threads you spoke of led dash light bulbs. I have done this and love them. Here's the thread
http://67-72chevytrucks.com/vboard/s...d.php?t=680335

Steve Cole · 04-01-2016, 08:58 AM

That sounds awesome! Can you provide details about your exhaust system? Are the mufflers Flowmaster 40's?
Thanks,

Mrturner1 · 04-02-2016, 02:26 PM

Quote:

Originally Posted by Boyd67

Mrturner, did you just screw tach mount to a pillar? I like where it is sitting. Truck sounds damn good too.

Yep drilled two holes and screwed it right in. I thought it might be too big, but after it was mounted it looked great. The huge windshield makes it look smaller lol

Mrturner1 · 04-02-2016, 02:26 PM

Quote:

Originally Posted by Redline novdog

Who needs tunes when that engine sounds like that!!! Sounds great!!! Good job working through all your problems. It was well worth it.
Not to hijack,but in one of your other threads you spoke of led dash light bulbs. I have done this and love them. Here's the thread
http://67-72chevytrucks.com/vboard/s...d.php?t=680335

Thanks man! I'll check out the thread too

Mrturner1 · 04-02-2016, 02:28 PM

Quote:

Originally Posted by Steve Cole

That sounds awesome! Can you provide details about your exhaust system? Are the mufflers Flowmaster 40's?
Thanks,

Long tube 1 5/8 primaries and Flowmasters 40 series, dumped right after the axle. It's 2 1/4 inch pipe right now though. I haven't swapped the pipes yet but it's going to be 2 1/2 with an X pipe soon

03-30-2016, 03:55 PM	#1
Mrturner1 Registered User Join Date: Nov 2015 Location: Colfax California Posts: 1,644	MrTurner1's project sound clip Hope the link works. This was an awesome experience for a first timer, and a lot of you guys helped a great deal. Thanks guys for all the help. It's far from done but it's finally tuned and dialed in under the hood. I'll get some more videos soon, we literally just got wifi at the new place so I wanted to get this up for listening enjoyment Comp 280H Magnum cam and Flowmasters, hard to beat that sound http://https://youtu.be/7SK0zVSEoUc

03-30-2016, 04:13 PM	#2
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,777	Re: MrTurner1's project sound clip Try again!! No worky!!

03-30-2016, 04:14 PM	#3
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,334	Re: MrTurner1's project sound clip Sounds cool! Here's a corrected link for you: http://youtu.be/7SK0zVSEoUc __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

03-30-2016, 04:18 PM	#5
Mrturner1 Registered User Join Date: Nov 2015 Location: Colfax California Posts: 1,644	Re: MrTurner1's project sound clip Don't mind the teradactyl poop on the windshield lol and the vibrating bed

03-30-2016, 05:57 PM	#6
dazza Registered User Join Date: Aug 2002 Location: California Posts: 971	Re: MrTurner1's project sound clip oh, it was the bed, I thought it was the license plate... at least you know what to tighten down before you put the 12" woofers in! it sounds great, I especially like that deep sub-bass as you enter the cab. __________________ --------------------------------------------------------- I'm not crazy, I'm chosen, there's a difference. ---------------------------- '72 K10 SWB, 350, sm465/np205 ---- ----

03-31-2016, 07:58 PM	#8
Average Joe Registered User Join Date: Feb 2009 Location: Southern Oregon Posts: 1,356	Re: MrTurner1's project sound clip Sounds great! Good job! __________________ 1967 C10 Suburban 454/TH400/3.07's An Average Joe and His 'Burb: http://67-72chevytrucks.com/vboard/s...d.php?t=775843

03-31-2016, 08:15 PM	#9
dazza Registered User Join Date: Aug 2002 Location: California Posts: 971	Re: MrTurner1's project sound clip I have bluetooth setup in my truck to play from my phone or the computer here in my garage so your clip worked out well. My nephews were here and keep asking when I'm going to start my truck up, so finally I said, you want to know what it will sound like?? hehe so I blasted your clip through my sound system! My poor nephew on the front seat didn't know what hit him!! Thanks! __________________ --------------------------------------------------------- I'm not crazy, I'm chosen, there's a difference. ---------------------------- '72 K10 SWB, 350, sm465/np205 ---- ----

03-31-2016, 11:38 PM	#11
Boyd67 Registered User Join Date: Feb 2016 Location: China Grove, NC Posts: 93	Re: MrTurner1's project sound clip Mrturner, did you just screw tach mount to a pillar? I like where it is sitting. Truck sounds damn good too. __________________ Boyd -67' C10 SWB FLEETSIDE LS 5.3 4 speed muncie

04-01-2016, 06:02 AM	#12
Redline novdog Registered User Join Date: Jan 2012 Location: Washington,Il Posts: 632	Re: MrTurner1's project sound clip Who needs tunes when that engine sounds like that!!! Sounds great!!! Good job working through all your problems. It was well worth it. Not to hijack,but in one of your other threads you spoke of led dash light bulbs. I have done this and love them. Here's the thread http://67-72chevytrucks.com/vboard/s...d.php?t=680335 __________________ It builds on my intelligence when I make a mistake, Boy am I building on it! '67 C-10,'70 Nova SS

04-01-2016, 08:58 AM	#13
Steve Cole Registered User Join Date: May 2012 Location: Faith,NC Posts: 1,626	Re: MrTurner1's project sound clip That sounds awesome! Can you provide details about your exhaust system? Are the mufflers Flowmaster 40's? Thanks,



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.