Shoulder Belt Mounted to Roll Bar - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BlazerLegacy · 04-06-2016, 05:55 PM

Anyone have a pic of a shoulder belt mounted to a roll bar?

I've currently got silverado seats with the integrated belt in my blazer, but I'm thinking of going with a more stock look for the seats.

Thanks,

hemi43 · 04-06-2016, 08:51 PM

Here's my setup;

truckster · 04-06-2016, 09:38 PM

I don't have a pic right now, but I welded a flat section right where I attached the mount. If you were looking from the top, it would look kind of like this: O except the flat isn't as wide as the roll bar. It's a piece of 1 inch wide stock.

**GMC-YA68** · 04-06-2016, 10:51 PM

Had my guy weld a bung to mine.

BlazerLegacy · 04-07-2016, 09:40 AM

Awesome! Thanks for the pics. The late model silverado seats sit up too high and I'm leaning toward a more stock look. I have a couple of different ideas about roll bars that I'll post as I progress. Might have to start a build thread.

CJM72 · 04-07-2016, 12:50 PM

GMC-YA68, what did you use for the shoulder belt with your Tahoe seats? I have the same seats and I'm trying to figure out what will work with the receptacle built into the seats.

**GMC-YA68** · 04-07-2016, 12:57 PM

Quote:

Originally Posted by CJM72

GMC-YA68, what did you use for the shoulder belt with your Tahoe seats? I have the same seats and I'm trying to figure out what will work with the receptacle built into the seats.

I had to take the factory tahoe seat receptacle off and just used the one that came with the shoulder belt instead.

04-06-2016, 05:55 PM	#1
BlazerLegacy Registered User Join Date: Feb 2013 Location: Rome, GA Posts: 33	Shoulder Belt Mounted to Roll Bar Anyone have a pic of a shoulder belt mounted to a roll bar? I've currently got silverado seats with the integrated belt in my blazer, but I'm thinking of going with a more stock look for the seats. Thanks, __________________ Zac 1970 Factory 2wd Blazer

04-06-2016, 08:51 PM	#2
hemi43 Registered User Join Date: Mar 2015 Location: Ontario Canada Posts: 1,526	Re: Shoulder Belt Mounted to Roll Bar Here's my setup; Attached Images

04-06-2016, 09:38 PM	#3
truckster Registered User Join Date: Jan 2001 Location: Orem, Utah Posts: 7,980	Re: Shoulder Belt Mounted to Roll Bar I don't have a pic right now, but I welded a flat section right where I attached the mount. If you were looking from the top, it would look kind of like this: O except the flat isn't as wide as the roll bar. It's a piece of 1 inch wide stock.

04-06-2016, 10:51 PM	#4
GMC-YA68 Senior Member Join Date: Mar 2004 Location: Lee's Summit, MO (KC) Posts: 742	Re: Shoulder Belt Mounted to Roll Bar Had my guy weld a bung to mine. Attached Images __________________ -Keegan- '72 Jimmy 4x4 - 5.3/4L65E/NP205 swap http://67-72chevytrucks.com/vboard/s...d.php?t=663780

04-07-2016, 09:40 AM	#5
BlazerLegacy Registered User Join Date: Feb 2013 Location: Rome, GA Posts: 33	Re: Shoulder Belt Mounted to Roll Bar Awesome! Thanks for the pics. The late model silverado seats sit up too high and I'm leaning toward a more stock look. I have a couple of different ideas about roll bars that I'll post as I progress. Might have to start a build thread. __________________ Zac 1970 Factory 2wd Blazer

04-07-2016, 12:50 PM	#6
CJM72 Registered User Join Date: Aug 2015 Location: Raynham, MA Posts: 222	Re: Shoulder Belt Mounted to Roll Bar GMC-YA68, what did you use for the shoulder belt with your Tahoe seats? I have the same seats and I'm trying to figure out what will work with the receptacle built into the seats.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.