Did this truck ever get finished? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67ChevyRedneck · 01-11-2016, 12:44 AM

I was racking my brain to try to figure out how the hell there weren't any weld lines all the way up for the door, or bedside or something... then it hit me... duh... it's a suburban side with the wheel well moved back, but then... suburbans had those ugly taillights and this has truck/blazer tail lights... arrgh!

There has to be some kind of spray paint color blend somewhere... because I just can't figure out what panels those are with the weld lines that are shown! Or is that really long enough to just be a long bed bed side??? Just doesn't seem like it would be that long... but maybe it is.

68C15 · 01-11-2016, 06:58 AM

honestly, it looks to be a regular long fleetside with the wheel well moved back and that's it.

I'd love to see it in person and find out how he attached the bedsides and front fenders to the cowl and main body. Do the front fenders use original mounts and the rears just weld to back of fronts?

It'd be nice to put that up on a hoist and look underneath.

**special-K** · 01-11-2016, 08:23 AM

It's made from one long bed C/10 pickup. I think frame was shortened and the sides are bedsides with wheel opening moved. All the cuts and welds, along with the continuous taper all show it as such. I figure those are complete bedsides with the length of frame established by the length of the bedsides

67ChevyRedneck · 01-11-2016, 11:17 AM

You guys are probably right... I guess with the wheel well moved it makes the long bed bedsides look longer than they really are.

**special-K** · 01-12-2016, 09:46 AM

It's something to study, that's for sure. In that first picture, if you took that filler out, the length looks about right. If you add that in the back, it looks about right. I kept looking back and forth real fast for about 10 minutes, that's how I'm so sure

CG · 01-24-2016, 05:06 PM

TTT in case someone recognizes it

**skrenly** · 01-24-2016, 06:24 PM

Quote:

Originally Posted by CG

TTT in case someone recognizes it

close but no cigar

YBNORML · 04-07-2016, 10:55 PM

I found this on Instagram. I don't know if there's a way to pull a pic from IG so I took a screen shot.

CG · 04-07-2016, 10:56 PM

Looks like it did get finished ... thanks for the pic!

**Dieselwrencher** · 04-07-2016, 11:12 PM

That is a really sweet truck! Who ever did the body mods did awesome work by the looks of it raw too!

**Boog** · 04-08-2016, 12:06 AM

Quote:

Originally Posted by YBNORML

I found this on Instagram. I don't know if there's a way to pull a pic from IG so I took a screen shot.

Jason good find. It looks like it did get finished. While it is good to see it smoothed up and in colors but now I can't say i like it better now than in the first pics. Something about that roughed in look.
There have to be more finished pics out there.

YBNORML · 04-08-2016, 02:04 AM

Quote:

Originally Posted by Boog

Jason good find. It looks like it did get finished. While it is good to see it smoothed up and in colors but now I can't say i like it better now than in the first pics. Something about that roughed in look.
There have to be more finished pics out there.

I agree, I've always thought the early/unfinished version looked the best.

1970 charlie · 04-08-2016, 07:11 AM

Not much in to the really slammed trucks but these 67-72 look real good, then comes along this highly modified one, this is so cool.

**lolife99** · 04-09-2016, 01:08 PM

Just found a recent picture of this truck on instagram,...

YBNORML · 04-09-2016, 01:11 PM

Quote:

Originally Posted by lolife99

Just found a recent picture of this truck on instagram,...

Haha, beat you to it

**lolife99** · 04-09-2016, 01:13 PM

Quote:

Originally Posted by YBNORML

Haha, beat you to it

Ha,... I didn't even see your post.
Wonder where this truck is now?

01-11-2016, 12:44 AM	#26
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Did this truck ever get finished? I was racking my brain to try to figure out how the hell there weren't any weld lines all the way up for the door, or bedside or something... then it hit me... duh... it's a suburban side with the wheel well moved back, but then... suburbans had those ugly taillights and this has truck/blazer tail lights... arrgh! There has to be some kind of spray paint color blend somewhere... because I just can't figure out what panels those are with the weld lines that are shown! Or is that really long enough to just be a long bed bed side??? Just doesn't seem like it would be that long... but maybe it is. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

01-11-2016, 06:58 AM	#27
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: Did this truck ever get finished? honestly, it looks to be a regular long fleetside with the wheel well moved back and that's it. I'd love to see it in person and find out how he attached the bedsides and front fenders to the cowl and main body. Do the front fenders use original mounts and the rears just weld to back of fronts? It'd be nice to put that up on a hoist and look underneath. __________________ Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card

01-11-2016, 08:23 AM	#28
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Did this truck ever get finished? It's made from one long bed C/10 pickup. I think frame was shortened and the sides are bedsides with wheel opening moved. All the cuts and welds, along with the continuous taper all show it as such. I figure those are complete bedsides with the length of frame established by the length of the bedsides __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-11-2016, 11:17 AM	#29
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Did this truck ever get finished? You guys are probably right... I guess with the wheel well moved it makes the long bed bedsides look longer than they really are. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

01-12-2016, 09:46 AM	#30
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Did this truck ever get finished? It's something to study, that's for sure. In that first picture, if you took that filler out, the length looks about right. If you add that in the back, it looks about right. I kept looking back and forth real fast for about 10 minutes, that's how I'm so sure __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-24-2016, 05:06 PM	#31
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,816	Re: Did this truck ever get finished? TTT in case someone recognizes it __________________ … … … … … … … … ... … … … … … … … … … … …

04-07-2016, 10:55 PM	#33
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,847	Re: Did this truck ever get finished? I found this on Instagram. I don't know if there's a way to pull a pic from IG so I took a screen shot. Attached Images __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

04-07-2016, 10:56 PM	#34
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,816	Re: Did this truck ever get finished? Looks like it did get finished ... thanks for the pic! __________________ … … … … … … … … ... … … … … … … … … … … …

04-07-2016, 11:12 PM	#35
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Did this truck ever get finished? That is a really sweet truck! Who ever did the body mods did awesome work by the looks of it raw too! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

04-08-2016, 07:11 AM	#38
1970 charlie Registered User Join Date: Oct 2015 Location: grand valley pa Posts: 52	Re: Did this truck ever get finished? Not much in to the really slammed trucks but these 67-72 look real good, then comes along this highly modified one, this is so cool.

04-09-2016, 01:08 PM	#39
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,690	Re: Did this truck ever get finished? Just found a recent picture of this truck on instagram,... Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.