|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-08-2016, 04:17 PM
|
#1 |
|
Registered User
Join Date: Aug 2006
Location: Athens, Georgia
Posts: 1,458
|
What year for Push-Pull power steering box?
I'm going to start on the '62 K10 build this summer, and wondered what years I need to look at for a Push-Pull power steering box?
Not interested in a cross-steer conversion... trying to keep things simple, and keep costs down using what's already there. Thanks, -Brad
__________________
'61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School |
|
|
|
04-08-2016, 07:35 PM
|
#2 |
|
Senior Member
 Join Date: Mar 2003
Location: Colfax-California
Posts: 8,628
|
Re: What year for Push-Pull power steering box?
Late '68 1969 for sure was the beginning
|
|
|
|
|
04-08-2016, 11:09 PM
|
#3 |
|
Registered User
Join Date: Mar 2011
Location: Co
Posts: 412
|
Re: What year for Push-Pull power steering box?
Are you upgrading axles also? going disk brakes on the front? Use what ever box came on the truck with the axle.
__________________
63 k20 with cummins 4bt, owned sence 1982 |
|
|
|
|
04-09-2016, 08:07 PM
|
#4 |
|
Registered User
Join Date: Aug 2006
Location: Athens, Georgia
Posts: 1,458
|
Re: What year for Push-Pull power steering box?
No, I'm not upgrading the front axle... gonna keep costs down and keep things simple by just rebuilding what I've got, at least for now.
Drum brakes, closed-knuckle D44. I've got two: one in the truck, and one that was retrofitted into a '56 GMC that a friend gave me. Between the two of them, I should have enough parts to make a good axle assembly, without spending a ton of money. I figure swapping steering boxes to PS isn't a real expensive proposition. -Brad
__________________
'61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School |
|
|
|
|
04-09-2016, 09:39 PM
|
#5 |
|
Registered User
Join Date: Mar 2011
Location: Co
Posts: 412
|
Re: What year for Push-Pull power steering box?
Any Chevy or GMC 4X4 power steering box up to about '87 , later on one tons and suburbans, should work then.
__________________
63 k20 with cummins 4bt, owned sence 1982 |
|
|
|
|
04-10-2016, 11:58 AM
|
#6 |
|
Windy Corner of a Dirty Street
Join Date: Jun 2003
Location: Pueblo West, Colorado
Posts: 2,926
|
Re: What year for Push-Pull power steering box?
1981 the Saginaw boxes went to Metric fittings so stay with something older than 1981
__________________
Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles
|
|
|
|
|
04-10-2016, 12:03 PM
|
#7 |
|
Registered User
Join Date: Mar 2011
Location: Co
Posts: 412
|
Re: What year for Push-Pull power steering box?
You can still use them just need the correct hose and pump.
__________________
63 k20 with cummins 4bt, owned sence 1982 |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
