Quote:
Originally Posted by aerotruk63
According to what I'm reading in the parts book a 3/8-16 X 7/8" Bolt for the pillar.
|
I'll look that up with part companies, LMC or Classic Parts I guess.
Quote:
Originally Posted by aerotruk63
The disk in the floor has incorporated in the floor assembly therefor has no separate part number. You should be able to reuse your old one.
|
Thought so, I guess its welded in place. Just wanted to check around before I start drilling and prying and ruin the thing.
Quote:
Originally Posted by aerotruk63
The inner cowl panel needs to be repaired, so if the patch panel is high enough, you can reinstall the hinge mounting plate from the inside of the cab with some metal cage fab'd up to hold it in place. As you know the plate needs to move with the door for positioning.
|
The patch panel is about 10 inches tall, so Illl cut a good bit of the cab out there so I can reach up and deal with that metal cage you described. Im betting it just rusted and fell apart. Thanks for that info!
Quote:
Originally Posted by aerotruk63
Impressive details in your thread, nicely done up.
|
Thanks Aerotruk for helping out!