Hedman #68460 Camaro Headers Installed on 77 C10

[TwinTurbo]

The OBX headers can be had on ebay sometimes for as little as 250 dollars or so, including the Y pipe. They are 1-3/4 not 1-1/2 like often listed in the auctions. The collectors are stepped down to 2.5" but can be easily cut off to any diameter up to 3" I have installed quite a few sets of those on thirdgens. PRetty damn nice headers for the super low price. And a perfect sized primary for some serious engine upgrades. the hedmans are only 1-5/8 primaries

[1redbowtie3]

Originally Posted by TwinTurbo

The OBX headers can be had on ebay sometimes for as little as 250 dollars or so, including the Y pipe. They are 1-3/4 not 1-1/2 like often listed in the auctions. The collectors are stepped down to 2.5" but can be easily cut off to any diameter up to 3" I have installed quite a few sets of those on thirdgens. PRetty damn nice headers for the super low price. And a perfect sized primary for some serious engine upgrades. the hedmans are only 1-5/8 primaries

For 90% the 1 5/8 will be much better, more torque ... and torque is King.

[TrailerTrash]

Originally Posted by 1redbowtie3

For 90% the 1 5/8 will be much better, more torque ... and torque is King.

thats why i wanted a set of long tubes like this. if i wouldnt be planning a 4.5/4 drop i would have kept the old headers

[KQQL IT]

These work. No smashing

D310c dougs