Roloc discs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68Timber · 04-24-2016, 12:55 PM

I'm paying about a buck each for these at Harbor Freight, and of course theirs don't last a minute. I'm curious where others buy them. I see them on Amazon for about the same price, but they're 3M brand. Is there a better source? Thanks.

K5FD89 · 04-24-2016, 01:09 PM

Most of the body shop supplies around Baton Rouge sell 3m for a box of 25 for about 25 bucks or less depending on size and grit.

Some are sticklers on having a account but most will sell to a cash customer.

68Timber · 04-24-2016, 05:12 PM

Thanks, there's one not far from me. If I can't get a decent deal there, Amazon isn't far off from jobber prices then.

turp mcspray · 04-24-2016, 10:08 PM

Norton "blaze". Can't tell you how much, but they are really good!

**richard2717** · 04-25-2016, 08:01 AM

I buy my 3m rolocs right at Napa. Been a while so I don't recall what they were charging.

Richard

tinydb84 · 04-25-2016, 12:00 PM

I get mine through Lehigh Valley Abrasives and they last a long time, good price too. I just put in an order though Empire Abrasives to see how good they are in comparison. I used to buy them at Harbor Freight but they don't last long enough and don't sell the roloc in flap disc style.

**kwmech** · 04-25-2016, 05:26 PM

I get mine from MSC industrial in both the 3M and the Nortons. I buy what ever is cheaper at the time

_Ogre · 04-25-2016, 07:30 PM

we buy disks off ebay
$13 to $15 for a box of 50

dwcsr · 04-25-2016, 08:28 PM

I usually get them from Lehigh Valley Abrasives as well, I find that using the correct grit and then going to a lighter grits gets it done faster and saves on the disks. I used to get an 80 and lay on it till it was where I wanted it, 5 discs later, but now I use a 36 to rough it out and 80 to smooth and 120 to get it sanding ready using only the three disks.

68Timber · 04-26-2016, 07:36 AM

^ I'm guilty of this.

**Advanced Design** · 04-26-2016, 03:58 PM

Quote:

Originally Posted by dwcsr

I usually get them from Lehigh Valley Abrasives as well, I find that using the correct grit and then going to a lighter grits gets it done faster and saves on the disks. I used to get an 80 and lay on it till it was where I wanted it, 5 discs later, but now I use a 36 to rough it out and 80 to smooth and 120 to get it sanding ready using only the three disks.

Looks like much better pricing than McMaster Carr where I was buying.

Next order will be http://www.lehighvalleyabrasives.com

68Timber · 04-27-2016, 06:59 PM

Those are good prices, I'll give them a try.

04-24-2016, 12:55 PM	#1
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Roloc discs I'm paying about a buck each for these at Harbor Freight, and of course theirs don't last a minute. I'm curious where others buy them. I see them on Amazon for about the same price, but they're 3M brand. Is there a better source? Thanks. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

04-24-2016, 01:09 PM	#2
K5FD89 Registered User Join Date: Jan 2010 Location: Baton Rouge La Posts: 21	Re: Roloc discs Most of the body shop supplies around Baton Rouge sell 3m for a box of 25 for about 25 bucks or less depending on size and grit. Some are sticklers on having a account but most will sell to a cash customer. __________________ 09 Tahoe 02 GMC 2500HD 90 GMC Jimmy 86 GMC C15 Shortbed Last edited by K5FD89; 04-24-2016 at 01:18 PM.

04-24-2016, 05:12 PM	#3
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: Roloc discs Thanks, there's one not far from me. If I can't get a decent deal there, Amazon isn't far off from jobber prices then. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

04-24-2016, 10:08 PM	#4
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: Roloc discs Norton "blaze". Can't tell you how much, but they are really good! __________________ Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299

04-25-2016, 08:01 AM	#5
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,135	Re: Roloc discs I buy my 3m rolocs right at Napa. Been a while so I don't recall what they were charging. Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

04-25-2016, 12:00 PM	#6
tinydb84 Registered User Join Date: Jul 2009 Location: San Jose Ca Posts: 2,871	Re: Roloc discs I get mine through Lehigh Valley Abrasives and they last a long time, good price too. I just put in an order though Empire Abrasives to see how good they are in comparison. I used to buy them at Harbor Freight but they don't last long enough and don't sell the roloc in flap disc style. __________________ David Used parts build: http://67-72chevytrucks.com/vboard/s...d.php?t=638991 My brother's Nova: http://www.67-72chevytrucks.com/vboa...d.php?t=727985 Rear suspension rework: http://www.67-72chevytrucks.com/vboa...d.php?t=750557 Instagram: myfabguy

04-25-2016, 05:26 PM	#7
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,641	Re: Roloc discs I get mine from MSC industrial in both the 3M and the Nortons. I buy what ever is cheaper at the time

04-25-2016, 07:30 PM	#8
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: Roloc discs we buy disks off ebay $13 to $15 for a box of 50 __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

04-25-2016, 08:28 PM	#9
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,131	Re: Roloc discs I usually get them from Lehigh Valley Abrasives as well, I find that using the correct grit and then going to a lighter grits gets it done faster and saves on the disks. I used to get an 80 and lay on it till it was where I wanted it, 5 discs later, but now I use a 36 to rough it out and 80 to smooth and 120 to get it sanding ready using only the three disks.

04-26-2016, 07:36 AM	#10
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: Roloc discs ^ I'm guilty of this. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

04-27-2016, 06:59 PM	#12
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: Roloc discs Those are good prices, I'll give them a try. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.