Welding/Fab Tables - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**CHIZZLER** · 04-12-2016, 11:21 PM

Let's see those workspaces. Here's my table. Searching CL one day I came across a fab shop closing down. They had 3 tables for sale and this was the medium one. It's a 6x10 with 1/2' plate top. It did not start out how it is now. I had to cut it down 4" and add inner structure under the plate top and adjustable feet. Also added everything you see attached. It now has air and power on the table. Also has a bottom shelf for grinders and stuff. Also got my wilton c-2 mounted and plenty of room for clamps. Got this table for $700 and sold my 4x8 for $500. Just looking for ideas on what others have done.

**Advanced Design** · 04-13-2016, 07:01 AM

Great thread idea. Holy cow that is a nice table! Can you show some detail on how the air tools are hanging?

**truckster** · 04-13-2016, 11:18 PM

I got a HF folding table for $49 on an open-box special. Does that count?

**CHIZZLER** · 04-14-2016, 10:36 PM

Quote:

Originally Posted by Advanced Design

Great thread idea. Holy cow that is a nice table! Can you show some detail on how the air tools are hanging?

Hey Doug the air tools holder is nothing special. Just 2 9-tool holders from summit. about $20 each.

**Advanced Design** · 04-14-2016, 11:31 PM

Quote:

Originally Posted by CHIZZLER

Hey Doug the air tools holder is nothing special. Just 2 9-tool holders from summit. about $20 each.

Thanks Chizzler. Found them. Didn't know they existed.

NONHOG · 04-15-2016, 03:33 PM

I'd have to give up a bay for that bad boy!
Makes my ol' Boeing surplus bench look pretty lame.

Valarius_Starchaser · 04-15-2016, 03:36 PM

Wow thats a nice table I have a parts washer top does that count?

**Dieselwrencher** · 04-15-2016, 03:45 PM

Chizzler, that is a sweet table! I don't have anything that fancy. I'd like to build a 3'x4' one for my garage but I have to wait to do it.

**richard2717** · 04-15-2016, 06:02 PM

I had to give up $25 for mine. another sign shop closed up and no one else wanted it because it was so heavy. its 4x10 and on heavy duty wheels but only has 1/4" top. I mostly use it for welding aluminum so it works out good.

.

franken · 04-15-2016, 08:00 PM

You're making me cry (laughing). Mine's a small rack door mounted on a Shopmate. I need to get an image hosting account so I can post pics.

**CHIZZLER** · 04-16-2016, 01:18 AM

Thanks for sharing everyone. Just wanted too see how other people setup there workspace and give ideas to others. It's not all about Who's got the biggest. LOL CHIZZLER.

**truckster** · 04-16-2016, 02:04 AM

Quote:

Originally Posted by CHIZZLER

Thanks for sharing everyone. Just wanted too see how other people setup there workspace and give ideas to others. It's not all about Who's got the biggest. LOL CHIZZLER.

So says the guy with the biggest table.

I want to get a CertiFlat 2X4 table eventually because I don't have a lot of extra shop space. But my HF table was a nice upgrade from my previous table, which was a 6X12 piece of 1/4 inch steel with a leg welded on it so I could mount it in my vise - that's 6X12 inches.

**Advanced Design** · 04-16-2016, 08:23 AM

Quote:

Originally Posted by CHIZZLER

Thanks for sharing everyone. Just wanted too see how other people setup there workspace and give ideas to others. It's not all about Who's got the biggest. LOL CHIZZLER.

I picked up the idea for mounting the air tools. Currently mine are piled all over the table and I've been looking for a better way. Yeah, maybe I live under a rock....

Here is how a buddy stores his.

Daddy'O · 04-17-2016, 01:58 PM

Here's my table. Built about 18 years ago. It stays outside when not in use. I had to put new casters on it last week do to it throwing some tread.

**Dieselwrencher** · 04-18-2016, 02:40 PM

Nice table Daddy'O. I sure need to get me some shop space like Chizzler and Daddy'O!

BossHogg69 · 04-18-2016, 10:19 PM

Miller ArcStation I lucked out and found a deal on craigslist. I added the weld curtain, but it came with all the small attachments for hanging tools on the sides. I'm still trying to get my shop situated, everything is just kinda piled against the wall right now.

You guys have some really nice stuff - I look forward to stealing some ideas

**Advanced Design** · 04-23-2016, 01:18 PM

Quote:

Originally Posted by truckster

So says the guy with the biggest table.

I want to get a CertiFlat 2X4 table eventually because I don't have a lot of extra shop space. But my HF table was a nice upgrade from my previous table, which was a 6X12 piece of 1/4 inch steel with a leg welded on it so I could mount it in my vise - that's 6X12 inches.

After I read your comment about Certiflat truckster, I started researching their product. It looks like a really good idea.

Does anyone here have one? Or opinions on their tables?

This might be for me since I never smile when welding.
http://weldtables.com

BR3W CITY · 04-25-2016, 02:26 AM

Ugh you guys have me so jealous right now. Been looking for the right piece of property and don't have much permanent space to put all my fun heavy stuff like a new fab table, bandsaw, chop saw etc.

Drooling until then.

**Dieselwrencher** · 04-25-2016, 09:13 PM

Those are pretty sweet!

Wasted Income · 04-25-2016, 10:16 PM

Here's my table. Its heavy as hell...my 45 hp diesel tractor won't touch it.

The top is 1" thick, and drilled and tapped for fixturing.

ryanroo · 04-28-2016, 10:08 AM

Here is my little baby. 3'x4' and 37" to the work surface. 3/4" plate and 3"x.125" tube legs a few piece of angle for a lower shelf.

04-12-2016, 11:21 PM	#1
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Welding/Fab Tables Let's see those workspaces. Here's my table. Searching CL one day I came across a fab shop closing down. They had 3 tables for sale and this was the medium one. It's a 6x10 with 1/2' plate top. It did not start out how it is now. I had to cut it down 4" and add inner structure under the plate top and adjustable feet. Also added everything you see attached. It now has air and power on the table. Also has a bottom shelf for grinders and stuff. Also got my wilton c-2 mounted and plenty of room for clamps. Got this table for $700 and sold my 4x8 for $500. Just looking for ideas on what others have done. Attached Images __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

04-13-2016, 07:01 AM	#2
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: Welding/Fab Tables Great thread idea. Holy cow that is a nice table! Can you show some detail on how the air tools are hanging? __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

04-13-2016, 11:18 PM	#3
truckster Senior Member Join Date: Jan 2001 Location: Orem, Utah Posts: 7,976	Re: Welding/Fab Tables I got a HF folding table for $49 on an open-box special. Does that count?

04-15-2016, 03:33 PM	#6
NONHOG Registered User Join Date: Feb 2007 Location: Marana, Arizona Posts: 3,454	Re: Welding/Fab Tables I'd have to give up a bay for that bad boy! Makes my ol' Boeing surplus bench look pretty lame. __________________ "I feel the need for speed!"... as soon as I am done with my nap.

04-15-2016, 03:36 PM	#7
Valarius_Starchaser Registered User Join Date: Sep 2015 Location: Sioux Falls, South Dakota Posts: 702	Re: Welding/Fab Tables Wow thats a nice table I have a parts washer top does that count? __________________ "Orange Crush"

04-15-2016, 03:45 PM	#8
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Welding/Fab Tables Chizzler, that is a sweet table! I don't have anything that fancy. I'd like to build a 3'x4' one for my garage but I have to wait to do it. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

04-15-2016, 06:02 PM	#9
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: Welding/Fab Tables I had to give up $25 for mine. another sign shop closed up and no one else wanted it because it was so heavy. its 4x10 and on heavy duty wheels but only has 1/4" top. I mostly use it for welding aluminum so it works out good. . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

04-15-2016, 08:00 PM	#10
franken Registered User Join Date: Jun 2013 Location: Somewhere Posts: 3,122	Re: Welding/Fab Tables You're making me cry (laughing). Mine's a small rack door mounted on a Shopmate. I need to get an image hosting account so I can post pics.

04-16-2016, 01:18 AM	#11
CHIZZLER SAVING ONE TRUCK AT A TIME Join Date: Feb 2010 Location: sherwood oregon Posts: 1,141	Re: Welding/Fab Tables Thanks for sharing everyone. Just wanted too see how other people setup there workspace and give ideas to others. It's not all about Who's got the biggest. LOL CHIZZLER. __________________ 53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999

04-17-2016, 01:58 PM	#14
Daddy'O Registered User Join Date: Jan 2012 Location: Whitesboro, Texas Posts: 932	Re: Welding/Fab Tables Here's my table. Built about 18 years ago. It stays outside when not in use. I had to put new casters on it last week do to it throwing some tread. Attached Images __________________ Cheers - Wayne Our Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=620966 '55 Wagon Build - http://67-72chevytrucks.com/vboard/s...d.php?t=689157 1971 Cheyenne Super Ochre/White LWB 350 Auto - my son's truck "Nancy" 1972 GMC K2500 Custom 4X4 Olive LWB 400 SB 4-speed -"Greenie" - Restoration to begin after the '55 Nothing sucks more than that moment during an argument when you realize you're wrong.

04-18-2016, 02:40 PM	#15
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Welding/Fab Tables Nice table Daddy'O. I sure need to get me some shop space like Chizzler and Daddy'O! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

04-18-2016, 10:19 PM	#16
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Welding/Fab Tables Miller ArcStation I lucked out and found a deal on craigslist. I added the weld curtain, but it came with all the small attachments for hanging tools on the sides. I'm still trying to get my shop situated, everything is just kinda piled against the wall right now. You guys have some really nice stuff - I look forward to stealing some ideas Attached Images __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

04-25-2016, 02:26 AM	#18
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Welding/Fab Tables Ugh you guys have me so jealous right now. Been looking for the right piece of property and don't have much permanent space to put all my fun heavy stuff like a new fab table, bandsaw, chop saw etc. Drooling until then. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

04-25-2016, 09:13 PM	#19
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Welding/Fab Tables Those are pretty sweet! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

04-25-2016, 10:16 PM	#20
Wasted Income Boosted Member Join Date: May 2002 Location: Mackinaw, IL Posts: 2,200	Re: Welding/Fab Tables Here's my table. Its heavy as hell...my 45 hp diesel tractor won't touch it. The top is 1" thick, and drilled and tapped for fixturing. __________________ 1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2023 Ford Explorer ST - Twin Turbskis 2023 Ford F150 RCSB - Whipple Supercharged 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards *TURBO ALL THE THINGS!!*



Register or Log In To remove these advertisements.

04-28-2016, 10:08 AM	#21
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: Welding/Fab Tables Here is my little baby. 3'x4' and 37" to the work surface. 3/4" plate and 3"x.125" tube legs a few piece of angle for a lower shelf. __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

Register or Log In To remove these advertisements.