Help just found these in the rear end.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Irishbleueyes · 05-01-2016, 06:48 PM

What the hell is this?? They were under the pinion down in the pocket. My pinion was making noise so I pulled it apart to rebuild it and the pinion was loose up and down. Went to set the pinion depth and it was 1/2 inch loose in and out just like it was when I pulled it apart and thats when I found these shims of some sort. Two of them are a little crunched.. Anyone know what they are or maybe my 12 bolt is some early one off?? It is a 65

T and S · 05-01-2016, 07:25 PM

part of the bearing cage maybe ??

Irishbleueyes · 05-01-2016, 07:27 PM

Quote:

Originally Posted by T and S

part of the bearing cage maybe ??

The bearings came out in one piece. I just don't understand what these are for..

**TJ's Chevy** · 05-01-2016, 07:51 PM

Whatever they are they don't seem to be in to good a shape. lol

Irishbleueyes · 05-01-2016, 08:53 PM

Quote:

Originally Posted by TJ's Chevy

Whatever they are they don't seem to be in to good a shape. lol

Ya TJ, they're beat! I hope someone knows what the deal is, it's maddening!!

donandal · 05-01-2016, 09:00 PM

that is interesting.

it's hard to tell how big they are.

what are the dimensions?

Irishbleueyes · 05-01-2016, 09:23 PM

Quote:

Originally Posted by donandal

that is interesting.

it's hard to tell how big they are.

what are the dimensions?

They are 1/2" x 1" about .020 thick

Tazimafied · 05-01-2016, 11:20 PM

They look like clutch tabs from a posi that broke off. They would have been holding the friction plates in place with the carrier.

mud.man.rj · 05-01-2016, 11:23 PM

I would also say clutch plate parts, was a posi.

Irishbleueyes · 05-01-2016, 11:52 PM

Quote:

Originally Posted by Tazimafied

They look like clutch tabs from a posi that broke off. They would have been holding the friction plates in place with the carrier.

Wow, is that normal after many many miles? Looks like thats what it is. Thanks for any and all info..

Irishbleueyes · 05-01-2016, 11:53 PM

Quote:

Originally Posted by mud.man.rj

I would also say clutch plate parts, was a posi.

I think it so.. damn

Irishbleueyes · 05-02-2016, 12:06 AM

Ah figured it out, its off the end clutch plate cage. Thank you all

Irishbleueyes · 05-02-2016, 12:11 AM

Quote:

Originally Posted by Irishbleueyes

Ah figured it out, its off the end clutch plate cage. Thank you all

I assume theres 2 in there and all the tabs are broken off..

**Captainfab** · 05-02-2016, 12:36 AM

That cage would be for the Dana/Spicer posi unit, not the Eaton style posi. Does your 12 bolt currently have a posi carrier in it?

Irishbleueyes · 05-02-2016, 12:47 AM

Quote:

Originally Posted by Captainfab

That cage would be for the Dana/Spicer posi unit, not the Eaton style posi. Does your 12 bolt currently have a posi carrier in it?

Yes, it does have posi.. those tabs look just like that Dana cage, what are they?

_Ogre · 05-02-2016, 12:24 PM

Quote:

Originally Posted by Irishbleueyes

Yes, it does have posi..

well... technically not any more

**Captainfab** · 05-03-2016, 12:18 AM

The ears on those plates, keep the clutch discs and plates from beating up the inside of the carrier. Plus they now have a little more room to move around.

vince1 · 05-03-2016, 06:28 AM

They sure aren't horseshoes. Any damage to crown and pinion?

Irishbleueyes · 05-03-2016, 10:30 AM

Quote:

Originally Posted by vince1

They sure aren't horseshoes. Any damage to crown and pinion?

No damage to pinion, however the inside bearing on pinion pulled off without any resistance. So maybe it overheated. Pulling the cage apart today or tomorrow..

05-01-2016, 06:48 PM	#1
Irishbleueyes Registered User Join Date: Apr 2012 Location: Solvang, Ca 93463 Posts: 323	Help just found these in the rear end.. What the hell is this?? They were under the pinion down in the pocket. My pinion was making noise so I pulled it apart to rebuild it and the pinion was loose up and down. Went to set the pinion depth and it was 1/2 inch loose in and out just like it was when I pulled it apart and thats when I found these shims of some sort. Two of them are a little crunched.. Anyone know what they are or maybe my 12 bolt is some early one off?? It is a 65 Attached Images

05-01-2016, 07:25 PM	#2
T and S Registered User Join Date: Dec 2013 Location: Oak Ridge, Mo. Posts: 301	Re: Help just found these in the rear end.. part of the bearing cage maybe ?? __________________ If you don't like this pound sand .....

05-01-2016, 07:51 PM	#4
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Help just found these in the rear end.. Whatever they are they don't seem to be in to good a shape. lol __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

05-01-2016, 09:00 PM	#6
donandal Registered User Join Date: Jun 2012 Location: Lakewood,New York Posts: 502	Re: Help just found these in the rear end.. that is interesting. it's hard to tell how big they are. what are the dimensions? __________________ 53 Chevy Pickup

05-01-2016, 11:20 PM	#8
Tazimafied Registered User Join Date: Feb 2015 Location: Ridgecrest, CA Posts: 94	Re: Help just found these in the rear end.. They look like clutch tabs from a posi that broke off. They would have been holding the friction plates in place with the carrier.

05-01-2016, 11:23 PM	#9
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: Help just found these in the rear end.. I would also say clutch plate parts, was a posi. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

05-02-2016, 12:06 AM	#12
Irishbleueyes Registered User Join Date: Apr 2012 Location: Solvang, Ca 93463 Posts: 323	Re: Help just found these in the rear end.. Ah figured it out, its off the end clutch plate cage. Thank you all

05-02-2016, 12:36 AM	#14
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,247	Re: Help just found these in the rear end.. That cage would be for the Dana/Spicer posi unit, not the Eaton style posi. Does your 12 bolt currently have a posi carrier in it? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

05-03-2016, 12:18 AM	#17
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,247	Re: Help just found these in the rear end.. The ears on those plates, keep the clutch discs and plates from beating up the inside of the carrier. Plus they now have a little more room to move around. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

05-03-2016, 06:28 AM	#18
vince1 Registered User Join Date: Jan 2013 Location: Calgary Alberta Posts: 1,166	Re: Help just found these in the rear end.. They sure aren't horseshoes. Any damage to crown and pinion?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.